Question for everyone with coilovers...
#1
Registered User
Thread Starter
Join Date: Sep 2007
Location: Torrance, California
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Question for everyone with coilovers...
i purchased the K&W Variant 3 and i put the rears to the lowest setting and i still have about a finger and a half gap. anyones coils go lower? plus i have 19's and the gap is still there.
#4
Modulated Moderator
iTrader: (3)
It's not "preload" in the common motorsports sense of the word......
You need to load the suspension before you tighten the control arms and suspension parts.
Make sure your suspension is in the normal position whaen you tighten the nuts/bolts...you can do this either by tightening them with the wheels on the ground...or by jacking the suspension up to normal ride height before you tighten them up
Hope this helps
You need to load the suspension before you tighten the control arms and suspension parts.
Make sure your suspension is in the normal position whaen you tighten the nuts/bolts...you can do this either by tightening them with the wheels on the ground...or by jacking the suspension up to normal ride height before you tighten them up
Hope this helps
Thread
Thread Starter
Forum
Replies
Last Post
nferguson88
RX-8 Parts For Sale/Wanted
1
10-06-2015 12:45 PM