Painted my Titanium Rx8s rear mesh and rotary accents
Painted my Titanium Rx8s rear mesh and rotary accents
Ive had my mesh and accents paintedfor over a month now and I finally got the cameradeveloped and scanned the pics tonight. Scanner reallykilled the quality b/c the actual pictures look much better. Only way you can tellthese were painted by me is if you are closeenough to touch the mesh and accents. Couldnt have done this w/o RX-8 2004 and Greg
Forthose of you who want to save money and havethe patience to paint the accents andmaybe the mesh then read this entire post
https://www.rx8club.com/showthread.p...threadid=12722
Forthose of you who want to save money and havethe patience to paint the accents andmaybe the mesh then read this entire post
https://www.rx8club.com/showthread.p...threadid=12722
Rear accentand mesh froma short distance
The exhaust tips needto be cleaned now all the time b/cthe mesh and accent really make the dirty tips verynoticeable
Sorryagain about the bad scanner quality
The exhaust tips needto be cleaned now all the time b/cthe mesh and accent really make the dirty tips verynoticeable
Sorryagain about the bad scanner quality
Last edited by JeRKy 8 Owner; Mar 6, 2004 at 09:41 PM.
i have some left over "chicken wire" (inside joke but describes it well) that i painted black and am going to put in the front openings around the fog lights to protect the grill behind from rocks and bugs....as for the center opening, i have to go buy more mesh....
i dont want the mesh to be seen as i like my black 8 all black....but the silver isnt bad! might go to more silver accents later on....like the grills and the side vents and a billet fuel door.
nice liitle mod...well done!
i dont want the mesh to be seen as i like my black 8 all black....but the silver isnt bad! might go to more silver accents later on....like the grills and the side vents and a billet fuel door.
nice liitle mod...well done!
Looks very sharp. That stock lower rear piece is the only part of the car that I don't care for. Just seems like mazda was like....oops...need to put something under the bumper....grab anything quick!!! The silver makes it look much better in imo.
I bought 2 bottles of Testors Silver Enamel paint since they are pretty small and wasnt sure if I had enough w/one to do everything.
I used a #4 artist brush too.
I also bought a bottle of Testors Black Enamel in case paint dripped onto the black parts by mistake.
Yes this did happen a couple times and the stains are noticeable but you cant tell unlessyou look really close. Ill have to get it professionally buffed out one dayif I ever sell the car.
I wish I had taped down the bottom portion of the bumper b/c that would have protected it from drips instead of just painting over the drips w/black. So you may want to get some tape and make sure you keep your hand steady.
Just soyou know now that Ive had this for a couple months noone really notices the painted mesh b/c its so low but the front accent is definitely a great addition to the front of the car.
I used a #4 artist brush too.
I also bought a bottle of Testors Black Enamel in case paint dripped onto the black parts by mistake.
Yes this did happen a couple times and the stains are noticeable but you cant tell unlessyou look really close. Ill have to get it professionally buffed out one dayif I ever sell the car.
I wish I had taped down the bottom portion of the bumper b/c that would have protected it from drips instead of just painting over the drips w/black. So you may want to get some tape and make sure you keep your hand steady.
Just soyou know now that Ive had this for a couple months noone really notices the painted mesh b/c its so low but the front accent is definitely a great addition to the front of the car.
I cant take it off until Im out ofmy current relationship. Trustme its not my idea. Maybe Ill attach her to the backend of my carand take a picture of that I think you guys wouldlike that
Last edited by JeRKy 8 Owner; Apr 30, 2004 at 09:22 PM.
nice
nice job. congrats to all who have done this. i think mine looks so much better than the stock ones when i go in to the dealer. the paint has held up well and its been almost a year since i did this. I still reccommend the vents and front mesh to complete the package. just search my posts if you're interested how that turned out for me.
Originally Posted by irish8
Jerky...looks good. Is that plate number for real??? Seems a little evil!!
- Irish
P.S. Oh yeah....ditch the rear plate frame!!! :o
- Irish
P.S. Oh yeah....ditch the rear plate frame!!! :o
666 is "The Mark"!
Thread
Thread Starter
Forum
Replies
Last Post
Jazzmeson
RX-8 Parts For Sale/Wanted
1
Aug 30, 2015 02:23 AM
Mr.Durden
RX-8's For Sale/Wanted
4
Aug 12, 2015 02:21 PM
akagc
RX-8's For Sale/Wanted
7
Aug 11, 2015 07:07 PM
Jazzmeson
West For Sale/Wanted
0
Aug 2, 2015 09:49 PM



