Lebren Rear Accent Light
Registered
Joined: Oct 2010
Posts: 92
Likes: 0
Don't know if anyone'll dig this deep into this ole thread but I just finished making the first batch of the next revision Rotor Accent Lights!
Benefits include:
Running Lights + Brake Lights
2 more LED's
50% brighter than original during braking
T-splice terminals Vs Tap Splices (per popular demand)
Same low price!
www.lebren.com
Warm regards,
Eren DuPee
Lebren
www.lebren.com
Benefits include:
Running Lights + Brake Lights
2 more LED's
50% brighter than original during braking
T-splice terminals Vs Tap Splices (per popular demand)
Same low price!
www.lebren.com
Warm regards,
Eren DuPee
Lebren
www.lebren.com
Biggg thanks...
Hey James, if you just ordered the light, you will be receiving one of the Rev 2 lights and receive the Instruction PDF on Monday or Tuesday. The first batch of Rev 2 RAL have shipped today! Woot!!
Hey buddy, I was helping a friend install his on Sunday but he had no instructions and this new one is different than my old one. Can you send me the updated .pdf?
The new install is essentially the same, the gray wire is the only new addition... So, black to black, blue to red/black, and gray to yellow/black. If you still need a copy simply email lebren@gmail.com and I can get a copy of the new or old instructions emailed to ya.
Flyinglizard, the contrast with the white blows my mind, maybe the new RAL is too bright... I might possibly have to tone it down a little
Brilliantblackrx8, she looks great! What exhaust are you rockin?
Before I forget, Please please P L E A S E anyone about to install these don't plug it into your 120V outlet! These are tested before shipping!Warm regards,
Eren DuPee
LEBREN
Home
Scratch that last one, these will be shipping in the future with bullet style terminal that 1) is not possible to plug into an outlet and 2) slides into a protective encasing to prevent any potential for shorting when installed. Thanks for the feedback guys!
Warm regards,
Eren DuPee
LEBREN
lebren.com
Warm regards,
Eren DuPee
LEBREN
lebren.com
Registered
Joined: Jul 2007
Posts: 669
Likes: 1
Erin, it's a Greddy EVOTT, It's suppose to be the last one sold in the US, some dude bought out the rest of the lot last year for his business in the Euro market. It's a great low tone, and quality is top notch.
light
[quote=Lebren;4310506]Hey 9K,
The new install is essentially the same, the gray wire is the only new addition... So, black to black, blue to red/black, and gray to yellow/black. If you still need a copy simply email lebren@gmail.com and I can get a copy of the new or old instructions emailed to ya.
Flyinglizard, the contrast with the white blows my mind, maybe the new RAL is too bright... I might possibly have to tone it down a little
my light comes with black and blue wires.how do i install it? (it didnt come with any instruccions)
The new install is essentially the same, the gray wire is the only new addition... So, black to black, blue to red/black, and gray to yellow/black. If you still need a copy simply email lebren@gmail.com and I can get a copy of the new or old instructions emailed to ya.
Flyinglizard, the contrast with the white blows my mind, maybe the new RAL is too bright... I might possibly have to tone it down a little
my light comes with black and blue wires.how do i install it? (it didnt come with any instruccions)
ok so i just researched how to stall the light and i found that black with black (ground) black /red with blue in both tail lights and it didnt work.. any advice? also i checked the all the "clips"were conected right
Registered
Joined: Oct 2010
Posts: 92
Likes: 0
ANYONE HAVE PROBLEM ON THE WIRING tTHING. SEEMS LIKE MINE CAN ONLY RUN EITHER DAYTIME RUNNING LIGHT OR BRAKE LIGHT.
It has only 1 level of brightness. When i turn on the light, it will not be on. Unless i press the brake.
Lebren dude, can u help me out? I want it to do just like the rear light, in the evening when i turn it on, i want 2 levels of brightness when Im braking and and not braking. Thank you
It has only 1 level of brightness. When i turn on the light, it will not be on. Unless i press the brake.
Lebren dude, can u help me out? I want it to do just like the rear light, in the evening when i turn it on, i want 2 levels of brightness when Im braking and and not braking. Thank you
Good morning James25520,
I understand the frustration and think I have a solution to your concern. The way the light works is this:
Blue wire ---> Black/Red,
Gray Wire --->Black/Yellow
Black--->Black
First, turn on the running lights. Second, hit the brakes. The light gets brighter when the brakes are applied only when the running lights are on first, this is important.
There exist LED's with 2 dice internally that will run independently but are very expensive and not bright enough. You'll notice on all the vehicles that run LED's for tails none of them use the same LED's for both purposes for this very reason. Double check your wiring, and please let me know if the problem persists either here or via email: lebren@gmail.com
I understand the frustration and think I have a solution to your concern. The way the light works is this:
Blue wire ---> Black/Red,
Gray Wire --->Black/Yellow
Black--->Black
First, turn on the running lights. Second, hit the brakes. The light gets brighter when the brakes are applied only when the running lights are on first, this is important.
There exist LED's with 2 dice internally that will run independently but are very expensive and not bright enough. You'll notice on all the vehicles that run LED's for tails none of them use the same LED's for both purposes for this very reason. Double check your wiring, and please let me know if the problem persists either here or via email: lebren@gmail.com
Glad to hear you got it! I wonder if the instructions email got put into junk mail?
Registered
Joined: Oct 2010
Posts: 92
Likes: 0
Good morning James25520,
I understand the frustration and think I have a solution to your concern. The way the light works is this:
Blue wire ---> Black/Red,
Gray Wire --->Black/Yellow
Black--->Black
First, turn on the running lights. Second, hit the brakes. The light gets brighter when the brakes are applied only when the running lights are on first, this is important.
There exist LED's with 2 dice internally that will run independently but are very expensive and not bright enough. You'll notice on all the vehicles that run LED's for tails none of them use the same LED's for both purposes for this very reason. Double check your wiring, and please let me know if the problem persists either here or via email: lebren@gmail.com
I understand the frustration and think I have a solution to your concern. The way the light works is this:
Blue wire ---> Black/Red,
Gray Wire --->Black/Yellow
Black--->Black
First, turn on the running lights. Second, hit the brakes. The light gets brighter when the brakes are applied only when the running lights are on first, this is important.
There exist LED's with 2 dice internally that will run independently but are very expensive and not bright enough. You'll notice on all the vehicles that run LED's for tails none of them use the same LED's for both purposes for this very reason. Double check your wiring, and please let me know if the problem persists either here or via email: lebren@gmail.com
It's like when i can 3 wires hook up, the light cannot be turn on at any moment.
but but when i hook only 2 of them, it works either on daytime running mode or brake mode.
not sure what is the problem.
Thank you again.
