FINALLY! Chickenwafer's RX-8
12-07-2008, 12:09 AM
#1
FINALLY! Chickenwafer's RX-8
I've been meaning to do this for a while but I FINALLY got off my lazy *** and took some pictures.
I really wanted everything to be perfect, but I just decided to do it. I used my crappy Casio Exlim so image quality isn't the best, but I spent a while in PS touching them up.
All in all I'm pretty happy with how they came out.
Hope everyone likes em! (EDIT: Added quick interior shot!)
Added Dyno (02.28.09)
302-rwhp, 231 ft-lbs of torque @ 9 PSI and 91 octane pump
Teh Parts:
Engine
-Cobb Tuning AccessPORT with custom Turbo maps
-Custom GReddy manifold, downpipe, charge piping/MazdaManiac-Garrett GT3071R internally-gated turbocharger
-GReddy Type-RS Blow-off valve
-Custom 28"x10"x3" core air-to-air front-mounted intercooler
-ATP 5-ply blue silicone couplers
-Staged 290/380/730 Denso fuel injectors
-K&N Polished MAF Tube
-Custom CAI with Vibrant 90-degree pipe and K&N filter
-Uber Custom LS2 Yukon Ignition system
-MSD 8.5MM Silicone spark plug wires
-NGK BUR9EQP FD RX-7 plugs in the Leading hole
-Agency Power polished crank pulley
-Snow Performance Stage 2 water/meth injection kit, custom mounted pump/tank
-HKS Hi-Power single-outlet exhaust with Titanium tip
-Custom 3" cat-delete pipe
-Custom trunk mounted Optima Red Top, 1/0g power wire, sealed trunk box
-BHR (Griffin) oversized aluminum radiator
-GReddy 1.3bar radiator cap
-GReddy polished air diversion panel
-Racing Beat water temp and oil temp/press gauge adapters
-Custom rotor-shaped oil fill cap
-Richard Sohn OMP adapter with custom mounted US Plastics tank (stock battery location)
Trans
-Fidanza billet aluminum lightweight flywheel
-ACT Heavy Duty street full face clutch
-ACT Heavy Duty street pressure plate
-Rotary Performance braided stainless steel clutch hose
-AxialFlow Engineering short-throw shifter
Suspension
-Koni Yellow adjustable sport shocks
-Sprint Performance lowering springs
-GReddy GREX Triple tube polished front strut tower brace
Wheels/Tires/Brakes
-Gram Lights 57 Maximums Light Gray painted 18x8.5' +45mm, 17.9lbs
-BFGoodrich Riken Raptor 245/40ZR-18 tires all four corners
-StopTech slotted brake rotors
-Hawk HPS Ferro brake pads
-Mazdatrix braided stainless steel brake lines
-G2 Gold brake caliper paint
Exterior
-Genuine Mazdaspeed front bumper
-Genuine Mazdaspeed side skirts
-Seibon KS Evo-style carbon fiber hood
-Rockblocker 3M clearbra on entire Seibon hood
-GT Factory Diablo vertical door kit
-NRG Carbon fiber hood dampers
-JDM Clear Corners
Interior
-Custom Boxcar Solutions mini CarPC (under passenger seat). Don't ask me anything about this I know nothing about PC's!!
-PIE Aux-in audio adapter (lets me play MP3s on the CarPC through the factory head unit)
-Eonon 7" LCD TFT Color touch screen VGA monitor
-Mazdaparts manual flip-up dashtop concealable screen mount
-Voodo shift ****
-Racing Beat fiberglass ashtray 3-gauge pod
-ProSport water temp and oil temp premium series warning gauges
-AEM UEGO wideband AFR gauge and sensor
-AEM electric boost gauge (a-pillar custom mounted)
-GReddy E-01 electronic boost controller
-Viper 5900 2-way paging LCD alarm
Whew! That's about it. I'm sure there's stuff I'm forgetting. I acutally remembered when uploading the photos I forgot to take any pics with the doors open! Opps. Next time for sure.
Overall right now I'm really happy with how the car drives, handles, and looks. It's semi-scary fast, handles on rails, and the looks are clean and subtly aggressive. I'm still not done yet, and thinking of moving the water/meth tank and pump to the trunk, new seats, water pump, AST, rad hoses, etc. It never ends!!
And yes, I know my catch can has no hoses hooked up to it! Hoses are on order!
I have to thank 8Club, Arizona Mazda Club (AZMC), and all my friends for helping me with my dream car. She's not done yet, but pretty much there!
Dave
I really wanted everything to be perfect, but I just decided to do it. I used my crappy Casio Exlim so image quality isn't the best, but I spent a while in PS touching them up.
All in all I'm pretty happy with how they came out.
Hope everyone likes em! (EDIT: Added quick interior shot!)
Added Dyno (02.28.09)
302-rwhp, 231 ft-lbs of torque @ 9 PSI and 91 octane pump
Teh Parts:
Engine
-Cobb Tuning AccessPORT with custom Turbo maps
-Custom GReddy manifold, downpipe, charge piping/MazdaManiac-Garrett GT3071R internally-gated turbocharger
-GReddy Type-RS Blow-off valve
-Custom 28"x10"x3" core air-to-air front-mounted intercooler
-ATP 5-ply blue silicone couplers
-Staged 290/380/730 Denso fuel injectors
-K&N Polished MAF Tube
-Custom CAI with Vibrant 90-degree pipe and K&N filter
-Uber Custom LS2 Yukon Ignition system
-MSD 8.5MM Silicone spark plug wires
-NGK BUR9EQP FD RX-7 plugs in the Leading hole
-Agency Power polished crank pulley
-Snow Performance Stage 2 water/meth injection kit, custom mounted pump/tank
-HKS Hi-Power single-outlet exhaust with Titanium tip
-Custom 3" cat-delete pipe
-Custom trunk mounted Optima Red Top, 1/0g power wire, sealed trunk box
-BHR (Griffin) oversized aluminum radiator
-GReddy 1.3bar radiator cap
-GReddy polished air diversion panel
-Racing Beat water temp and oil temp/press gauge adapters
-Custom rotor-shaped oil fill cap
-Richard Sohn OMP adapter with custom mounted US Plastics tank (stock battery location)
Trans
-Fidanza billet aluminum lightweight flywheel
-ACT Heavy Duty street full face clutch
-ACT Heavy Duty street pressure plate
-Rotary Performance braided stainless steel clutch hose
-AxialFlow Engineering short-throw shifter
Suspension
-Koni Yellow adjustable sport shocks
-Sprint Performance lowering springs
-GReddy GREX Triple tube polished front strut tower brace
Wheels/Tires/Brakes
-Gram Lights 57 Maximums Light Gray painted 18x8.5' +45mm, 17.9lbs
-BFGoodrich Riken Raptor 245/40ZR-18 tires all four corners
-StopTech slotted brake rotors
-Hawk HPS Ferro brake pads
-Mazdatrix braided stainless steel brake lines
-G2 Gold brake caliper paint
Exterior
-Genuine Mazdaspeed front bumper
-Genuine Mazdaspeed side skirts
-Seibon KS Evo-style carbon fiber hood
-Rockblocker 3M clearbra on entire Seibon hood
-GT Factory Diablo vertical door kit
-NRG Carbon fiber hood dampers
-JDM Clear Corners
Interior
-Custom Boxcar Solutions mini CarPC (under passenger seat). Don't ask me anything about this I know nothing about PC's!!
-PIE Aux-in audio adapter (lets me play MP3s on the CarPC through the factory head unit)
-Eonon 7" LCD TFT Color touch screen VGA monitor
-Mazdaparts manual flip-up dashtop concealable screen mount
-Voodo shift ****
-Racing Beat fiberglass ashtray 3-gauge pod
-ProSport water temp and oil temp premium series warning gauges
-AEM UEGO wideband AFR gauge and sensor
-AEM electric boost gauge (a-pillar custom mounted)
-GReddy E-01 electronic boost controller
-Viper 5900 2-way paging LCD alarm
Whew! That's about it. I'm sure there's stuff I'm forgetting. I acutally remembered when uploading the photos I forgot to take any pics with the doors open! Opps. Next time for sure.
Overall right now I'm really happy with how the car drives, handles, and looks. It's semi-scary fast, handles on rails, and the looks are clean and subtly aggressive. I'm still not done yet, and thinking of moving the water/meth tank and pump to the trunk, new seats, water pump, AST, rad hoses, etc. It never ends!!
And yes, I know my catch can has no hoses hooked up to it! Hoses are on order!
I have to thank 8Club, Arizona Mazda Club (AZMC), and all my friends for helping me with my dream car. She's not done yet, but pretty much there!
Dave
Last edited by chickenwafer; 08-04-2009 at 04:31 PM.
12-07-2008, 12:28 AM
#6
Administrator
iTrader: (7)
I don't remember seeing this little beast at SevenStock....
Just messin' with ya Dave, car looks awesome
Just messin' with ya Dave, car looks awesome
12-07-2008, 04:07 AM
#17
Congrats dude!
Every single mod was perfectly chosen and you can tell you did your homework.
Now that the car is done how do you feel? Most of the time when there is nothing else to mod ppl get bored and part it out.
Every single mod was perfectly chosen and you can tell you did your homework.
Now that the car is done how do you feel? Most of the time when there is nothing else to mod ppl get bored and part it out.
12-07-2008, 08:19 AM
#22
looks very clean. I like.
You'll have to give me some hints on how to clean up the battery lines. I relocated mine to the trunk, but I have all the OEM wires in the usual spot and it looks messy.
You'll have to give me some hints on how to clean up the battery lines. I relocated mine to the trunk, but I have all the OEM wires in the usual spot and it looks messy.
