3 rotor RX8 engine bay progress
Thread Starter
angeljoelv
Joined: Apr 2007
Posts: 1,635
Likes: 1
From: Florida
Very happy with the way the car is coming out. It looks like tomorrow it will get a new tranny mount and after that we wait for the axles to arrive. In the mean time A whole new little things coming.
what it is!?
Thread Starter
angeljoelv
Joined: Apr 2007
Posts: 1,635
Likes: 1
From: Florida
yes sir. The only reason I added a 2nd BOV is because I started having throttle control problems at higher boost. Air had no way (not enough) of escaping so it pushed the thottle open and the car would stay accelerated after I let off. It would only happen at higher boost. I tried fixing it by putting a stronger spring on the throttle but it didnt really fix the problem. After many tries and checking for everything I could think of, a friend of mine told me he had the same problem and they fixed it with an extra BOV, so I am going to give it a try. Lets see what happens
Last edited by angeljoelv; Oct 9, 2011 at 01:30 AM.
yes sir. The only reason I added a 2nd BOV is because I started having throttle control problems at higher boost. Air had no way (not enough) of escaping so it pushed the thottle open and the car would stay accelerated after I let off. It would only happen at higher boost. I tried fixing it by putting a stronger spring on the throttle but it didnt really fix the problem. After many tries and checking for everything I could think of, a friend of mine told me he had the same problem and they fixed it with an extra BOV, so I am going to give it a try. Lets see what happens
Thread Starter
angeljoelv
Joined: Apr 2007
Posts: 1,635
Likes: 1
From: Florida
I ran it at 12psi for a long time with no problems. raised it at around 16 and started having the throttle problem. The hp that i want I will only reach at much higher psi though. I will be taking it to the 1/4 mile to have some fun and show some folks we can make some good numbers on straight lines too. the car will be tuned at around 25psi.
Thread Starter
angeljoelv
Joined: Apr 2007
Posts: 1,635
Likes: 1
From: Florida
^^ they know what is coming to them. 
.
Frame connectors are done. Very happy with SD Fabrication's work. Tranny mount should be done by tomorrow and car is coming back to my shop to get put back together.
.Frame connectors are done. Very happy with SD Fabrication's work. Tranny mount should be done by tomorrow and car is coming back to my shop to get put back together.