oil metering intermittent problem
#26
#27
Weekend Warrior
If you find this to be the case then use a decent amount of degreaser spray on entire plug (both sides of each connector) then same with electrical contact cleaner.
My high km engine has a slight oil leak from an unknown location nearby MOP, hence the 1688 and CEL. I did all of this 3 months ago only to arrive at this point (I just thought it was dirty connectors or the switch that needed adjusting at the time!)
This time round I used electrical tape to keep the slow oil weep out of the connector and therefore not trigger the 1688 and limpy that comes for free with it! Hope this helps someone else as I have spent countless hours researching this PIA debilitating issue.
I really hope this gets me through to rebuild time without related issues, fingers crossed!
The following users liked this post:
Paul O'Hara (01-13-2021)