Notices
RX-8 Discussion General discussion about the RX-8 that doesn't fit in one of the specialty forums.

It's 'normal'...

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 05-25-2006, 08:25 PM
  #26  
Club Marbles Member
Thread Starter
 
Raptor2k's Avatar
 
Join Date: Jul 2005
Location: DFW, TX
Posts: 3,252
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by zoom44
try this- ask them "if its normal then can you explain to me what causes the noise?"
The thing is - they have NO idea. If they found out why, they'd tell me by now, and probably have it fixed.

Again, in my case, there's no power loss, just that 'marbles in a blender' sound at ~7300 RPM all the way to ~7900. It's not horribly loud either, but it's a little annoying. I can live with it, assuming it doesn't affect my engine especially when my warranty is up. But I'd rather find a solution.


Another excuse by the guys at the dealership is that I shouldn't be revving that high. Well, no, I SHOULD be revving that high with the rotary. Of course, I usually shift at around ~3500 but when I'm having fun with the SPORTS car that I purchased, I don't need that rattle.


And I've tried 93 octane from a bunch of different gas stations, including Shell. I'm thinking about trying this octane booster stuff I saw at Autozone.

Last edited by Raptor2k; 05-25-2006 at 08:27 PM.
Old 05-25-2006, 08:29 PM
  #27  
Administrator
 
zoom44's Avatar
 
Join Date: Jul 2002
Location: portland oregon
Posts: 21,958
Received 115 Likes on 88 Posts
that is unnacceptable- if its normal then they should be able to tell you why its normal. get it in writing. calll MNAO and ask for the explanation to be provided. nobody should walk away from a "its normal" without a full explanation/education about what makes it normal-this issue or any other anytime.
Old 05-25-2006, 08:30 PM
  #28  
Administrator
 
zoom44's Avatar
 
Join Date: Jul 2002
Location: portland oregon
Posts: 21,958
Received 115 Likes on 88 Posts
Raptor2k are you anywhere near Austin?
Old 05-25-2006, 08:31 PM
  #29  
Club Marbles Member
Thread Starter
 
Raptor2k's Avatar
 
Join Date: Jul 2005
Location: DFW, TX
Posts: 3,252
Likes: 0
Received 0 Likes on 0 Posts
Yes, about 3 hours away, Arlington is a sub-urb of Dallas. I'll try calling MNAO later.
Old 05-26-2006, 03:54 AM
  #30  
Registered
 
KostasNK's Avatar
 
Join Date: May 2006
Location: Athens, Greece
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
I have the same rattling noise on my 8. It has 3400km on the odometer. This happens also when the car is not moving, and I press the gass pedal, on around 7000rpm's I hear this marbles in a can sound. When I open the passenger door,or the passenger window,I can't hear it. Maybe it's because of the outside noise,that I can't hear it. I am not sure.
When I went for my first oil change, they said it's normal. The told me:"Wait and on the next oil change see how it goes..." I didn't insist at that time, because I had no more time...
I think I will try to go to another authorised dealer to check it out.
I hope that my motor is not going to malfunction because of this...
Hopefully it's new and I have the warranty...
Old 05-26-2006, 10:17 AM
  #31  
Administrator
 
zoom44's Avatar
 
Join Date: Jul 2002
Location: portland oregon
Posts: 21,958
Received 115 Likes on 88 Posts
see im almost 100% sure that you are hearing the normal S-DAIS operation- i doubt you have an issue
Old 05-26-2006, 12:18 PM
  #32  
stop flooding ur engines
 
RoXanneBlack8's Avatar
 
Join Date: Jul 2005
Location: NE
Posts: 587
Likes: 0
Received 1 Like on 1 Post
yeah if its making that noise and it runs perfect, i guess its the sdais. but when ur car falls on its face over 7k, hence my issue. im thinking its kocking. 18 more hours till i compression test her....yay
Old 05-26-2006, 05:15 PM
  #33  
Registered
 
KostasNK's Avatar
 
Join Date: May 2006
Location: Athens, Greece
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
I went to another authorized dealer just a few hours after my previous post.
This dealer is the biggest in Greece.
They heard it and told me that it's not coming from the engine,but from the passenger side dashboard. They told me to take it in on Monday to pinpoint the source of this sound.
Something on the dashboard is loose, from the assembly line in the factory, an it is vibrating at around 7000rpm. Whatever it is,it will be covered by warranty. I will update you on this issue. Hope it will be sorted out on Monday!!!
Old 05-26-2006, 05:33 PM
  #34  
Even My Dog Searches
iTrader: (1)
 
Mugatu's Avatar
 
Join Date: Jul 2004
Location: NY
Posts: 2,664
Likes: 0
Received 1 Like on 1 Post
Originally Posted by KostasNK
I went to another authorized dealer just a few hours after my previous post.
This dealer is the biggest in Greece.
They heard it and told me that it's not coming from the engine,but from the passenger side dashboard. They told me to take it in on Monday to pinpoint the source of this sound.
Something on the dashboard is loose, from the assembly line in the factory, an it is vibrating at around 7000rpm. Whatever it is,it will be covered by warranty. I will update you on this issue. Hope it will be sorted out on Monday!!!
great. nice hijack.
Old 05-26-2006, 05:47 PM
  #35  
Club Marbles Member
Thread Starter
 
Raptor2k's Avatar
 
Join Date: Jul 2005
Location: DFW, TX
Posts: 3,252
Likes: 0
Received 0 Likes on 0 Posts
Keep me updated. It's around my dashboard (probably more near the hood) on the passenger side too
Old 05-26-2006, 10:09 PM
  #36  
stop flooding ur engines
 
RoXanneBlack8's Avatar
 
Join Date: Jul 2005
Location: NE
Posts: 587
Likes: 0
Received 1 Like on 1 Post
anyone else find it NOt a coincidence that that is where the complicated intake system is situated. hello
Old 05-29-2006, 10:06 PM
  #37  
Registered
 
BunnyGirl's Avatar
 
Join Date: Dec 2005
Location: Portland, OR
Posts: 2,327
Received 1 Like on 1 Post
Originally Posted by RoXanneBlack8
im gonna go ahead and agree with zoom44. its gotta be a ping. i switvched gas brands a few weeks ago and it hasnt returned. i USED to use sunoco 94, then 93, now i use shell 93. perhaps the computer didnt advance the timing enuff when i was wailing on it? perhaps that 94 wasnt REALLY 94? same goes for their 93????

My car started really hard this morning and ran really rough for several minutes and was running kinda sluggish for the first few miles, then seemed to be close to normal. I was thinking it was probably the gas. I had filled it up on Saturday and then hadn't driven it since then, except to get home. I got gas at a station different than normal since I was at a point where I really needed to get gas and not near my usual two Chevron station choices. I ended up getting Shell this time. I only put in premium gas, ever. My mileage doesn't appear to be doing so well this tank either. I called my dealership and they said it sounds like something with gas but if it is still doing it after I use up the tank on new gas then to bring it in. I didn't have any "sounds" though.
Old 05-30-2006, 01:12 AM
  #38  
Club Marbles Member
Thread Starter
 
Raptor2k's Avatar
 
Join Date: Jul 2005
Location: DFW, TX
Posts: 3,252
Likes: 0
Received 0 Likes on 0 Posts
Hmm...still thinking whether I should try an 'octane booster' and seeing how that goes...
Old 06-04-2006, 09:30 AM
  #39  
the stig is my hero
 
zenmoused's Avatar
 
Join Date: Feb 2006
Location: NC
Posts: 701
Likes: 0
Received 0 Likes on 0 Posts
Don't do it Raptor. Those things are just plain bad. I brought mine in for the "marbles in a blender" noise above 6k, and they gave it back to me saying they couldn't find it, 2 days later. So I put the service guy in my passenger seat and revved in their parking lot to 6 or 7k. Clear as day. I wonder if these guys just skip certain cars at random, and not even turn them on? Anyway, the guy said it's most likely some part of the dashboard rattling. I was in a hurry at the time, and said I'd bring it back in next week... But I call BS on this one.

Sorry, it's above the intake system, and if I'm not mistaken the cat as well. It only happens at RPM's and unless there's about twenty loose pieces in the dash, it's not coming from there. I'm more than a little disappointed over all the little QA things that Mazda misses on our cars. This is the fourth non-scheduled dealer visit since getting my car 2 months ago new. You'd think for a 30k car they'd care how satisfied their customers were and make it right the first time.
Old 06-04-2006, 03:32 PM
  #40  
Club Marbles Member
Thread Starter
 
Raptor2k's Avatar
 
Join Date: Jul 2005
Location: DFW, TX
Posts: 3,252
Likes: 0
Received 0 Likes on 0 Posts
sucks
Old 06-04-2006, 07:58 PM
  #41  
Registered User
 
FuryCustoms's Avatar
 
Join Date: May 2006
Location: Fayetteville, NC
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
zenmoused, where are you in NC? Im a tech at Flow Mazda in fayetteville. If your near the fay. area you should stop by. We wont b.s. you like most other dealers. If you can you should come by because I am very curious about the noise you all are hearing. If you are going to stop by PM me and I will give you the # to set up an appointment.
Old 06-05-2006, 06:00 AM
  #42  
Registered
 
KostasNK's Avatar
 
Join Date: May 2006
Location: Athens, Greece
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
I finaly found the time and took it to the dealer today. They were checking it for 2 1/2 hours.
They discovered that it is coming from a little cooler that is located inside tha dashboard. (I saw it myself.)
The cooling fluid is circulating there realy fast and it's causing this rattling noise. They said that it is better to send an email to mazda - japan and describe the problem, so they can tell them what to do. Maybe if your dealers do the same, they will issue a TSB.
When they temporarily shut of the cooling fluid circulation the rattling noise stopped. Maybe there is something wrong with the tubing or the radiator making a turbulent flow of the cooling fluid.(My guess)
In 2 to 3 days they will inform me what Mazda-Japan has to say about this issue.
They informed me that there is no problem with the car and nothing is going to happen to the motor. I am covered now because the issue is documented.
I hope this problem will soon be resolved.
Old 06-05-2006, 08:43 AM
  #43  
the stig is my hero
 
zenmoused's Avatar
 
Join Date: Feb 2006
Location: NC
Posts: 701
Likes: 0
Received 0 Likes on 0 Posts
FuryCustoms- I'm located in Chapel Hill, so it's unfortunately a bit of a drive. If they can't do anything for me down here next week when I take it in, I'll definitely take you up on that. It would be really nice to have a dealer I can take it to that isn't full of it.
Old 06-22-2006, 01:21 PM
  #44  
Registered User
 
aerospacediver's Avatar
 
Join Date: Aug 2005
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by KostasNK
I finaly found the time and took it to the dealer today. They were checking it for 2 1/2 hours.
They discovered that it is coming from a little cooler that is located inside tha dashboard. (I saw it myself.)
The cooling fluid is circulating there realy fast and it's causing this rattling noise. They said that it is better to send an email to mazda - japan and describe the problem, so they can tell them what to do. Maybe if your dealers do the same, they will issue a TSB.
When they temporarily shut of the cooling fluid circulation the rattling noise stopped. Maybe there is something wrong with the tubing or the radiator making a turbulent flow of the cooling fluid.(My guess)
In 2 to 3 days they will inform me what Mazda-Japan has to say about this issue.
They informed me that there is no problem with the car and nothing is going to happen to the motor. I am covered now because the issue is documented.
I hope this problem will soon be resolved.
I guess it is the a/c evaporator you are talking about? I know that the a/c system cuts out at a certain rpm to free up more hp for the engine. So is the coolant bypassing to relieve pressure on the system?
Old 06-22-2006, 01:26 PM
  #45  
Administrator
 
zoom44's Avatar
 
Join Date: Jul 2002
Location: portland oregon
Posts: 21,958
Received 115 Likes on 88 Posts
hence how hard it is to accurately diagnose a sound you cant hear yourself. he's talking about air gurgling thu the heater core or AC evaporator
Old 06-22-2006, 02:03 PM
  #46  
Registered
 
Subdivisions's Avatar
 
Join Date: Jun 2006
Location: Louisville, KY
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
I have a rattling noise on my car as well.
Mine sounds different than the ones I've read in this thread though.
I only hear mine when driving on rough roads.
My subdivision has a cobblestone entry, and when i'm driving (30 mph? or more) i hear this metallic rattle. sounds like thin metal vibrating against thin metal.

I just bought the the car used.
I think I'll have it checked out.
Has anyone else heard this noise?
Old 06-22-2006, 02:29 PM
  #47  
Registered
 
puch96's Avatar
 
Join Date: May 2006
Location: Milan, Michigan
Posts: 575
Likes: 0
Received 0 Likes on 0 Posts
Dealerships have the tendency to say "it's normal" when they have no idea of what's going on.....
Old 06-22-2006, 02:35 PM
  #48  
Club Marbles Member
Thread Starter
 
Raptor2k's Avatar
 
Join Date: Jul 2005
Location: DFW, TX
Posts: 3,252
Likes: 0
Received 0 Likes on 0 Posts
True

Still have to call the guys in Austin, zoom44, lol. But before that I'm gonna try another dealership that's about half hour away when I get the time. It's Freeman Mazda in Irving, I've heard their service is great.
Old 06-22-2006, 02:37 PM
  #49  
Administrator
 
zoom44's Avatar
 
Join Date: Jul 2002
Location: portland oregon
Posts: 21,958
Received 115 Likes on 88 Posts
owners have a tendancy to accept "its normal" without an explanation as to why and then come here and ask us to diagnose. why dont they just get an explanation from the service person?

subdivisions- does it have an aftermarket exhaust?
Old 06-22-2006, 02:45 PM
  #50  
Health Supplement User
 
hedgecore's Avatar
 
Join Date: Jun 2005
Posts: 242
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Raptor2k
The thing is - they have NO idea. If they found out why, they'd tell me by now, and probably have it fixed.

Again, in my case, there's no power loss, just that 'marbles in a blender' sound at ~7300 RPM all the way to ~7900. It's not horribly loud either, but it's a little annoying. I can live with it, assuming it doesn't affect my engine especially when my warranty is up. But I'd rather find a solution.


Another excuse by the guys at the dealership is that I shouldn't be revving that high. Well, no, I SHOULD be revving that high with the rotary. Of course, I usually shift at around ~3500 but when I'm having fun with the SPORTS car that I purchased, I don't need that rattle.


And I've tried 93 octane from a bunch of different gas stations, including Shell. I'm thinking about trying this octane booster stuff I saw at Autozone.
Wow, i have the same issue...it sounds like clicking, or gravel in a metal pipe being shaken around...or like a strange high frequency rattle...hard to explain, but i think it's just what yyou are talking about!


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: It's 'normal'...



All times are GMT -5. The time now is 07:52 AM.