ok, so i was trying to install footwell LEDs and was following ROTARY RASP's instructions on how to install...

as i was crimping the wires from the LEDs to the Blue wire w/ red stripe i see a spark...know that this isn't good i check to see if anything happened, and now my power locks don't work. my radio doesn't work. and my interior lights dont work at all.

i know i must of shorted something...but what is it? and any ideas on how to fix it?

 

FUSE Look in the kick panel in the drivers side footwell....

 

alright...what am i looking for exactly?

 

Your looking for a blown fuse. Just check them all.

 

A fuse that has a melted center wire....pull them out with the tool ( white tweezerlike thing) and look at them..it will be obvious which one is burnt

 

alright...thanks guys i'll go check that out now then..

 

ya iv done that a couple times by accident, if its not in the box by driver then its under the hood in that box lol. iv blown a couple fuses in my day=)

 

thanks guys...yeah it was a blown fuse...good thing the fuse box in our cars has spares..didn't have to make a trip to the auto parts store. just put in the spare...

man what a newb...thanks for the help! the 8's back to normal now...

 

nice job nikko N00B!

 

it happens to everyone

 

^no it doesnt

 

thanks dozer! hahah


now i just need to get these damn rotary rasp LEDs to work!

 

sooner or later something will happen to your car look at my pee stain

 

!!!!!!! when you are working on any type of electrical crap DISCONNECT THE BATTERY!!

 

I did this too I had to get my towed to the dealer though cause I grounded to the ignition module. doh.

 

i know this now..