Notices
RX-8 Discussion General discussion about the RX-8 that doesn't fit in one of the specialty forums.
Sponsored by:
Sponsored by: CARiD

BHR Ignition Coil Set question..

Old Mar 31, 2009 | 04:45 PM
  #26  
Easy_E1's Avatar
Registered
iTrader: (2)
 
Joined: Sep 2005
Posts: 7,675
Likes: 5
From: Bellevue WA
Originally Posted by Fluid Motorsports
No need new coil packs on the way that actually work for forced induction applications!
What are you talking about Brice? Are you saying our coil kit doesn't work in forced induction applications?

It must work otherwise you wouldn't have stole the idea!
The clock is ticking!
Old Mar 31, 2009 | 04:46 PM
  #27  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,601
Likes: 3,460
From: The Dark Side
Originally Posted by exsequor
I'm at 70k miles now so I'm going to go ahead and replace the oem coils and plugs. Also going to be getting hi-flo cat. What should I expect to pay to have a new cat and exhaust tips welded and installed?
here's the best supercat: http://www.rx7.com/store/rx8/rx8exhaust.html
New exhaust tips? What exhaust do you have now?
Old Mar 31, 2009 | 04:48 PM
  #28  
bse50's Avatar
#50
 
Joined: Nov 2007
Posts: 7,521
Likes: 11
From: Caput Mundi
Originally Posted by Easy_E1
What are you talking about Brice? Are you saying our coil kit doesn't work in forced induction applications?

It must work otherwise you wouldn't have stole the idea!
The clock is ticking!
No Erick. You kit doesn't work with FI. That's why MazdaManiac is still using the first prototype without issues
This is ridiculous.

@Jedi: the RP supercat is nothing special. For the best results i would lean towards Ferrita or HJS
Old Mar 31, 2009 | 05:58 PM
  #29  
exsequor's Avatar
Thread Starter
wipe me down
iTrader: (1)
 
Joined: Apr 2008
Posts: 825
Likes: 1
From: Colorado Springs, CO
Nah I'm not buying from fluid, I've heard lots of good things about the BHR set and about their reliability since I've joined the board so I'm going to go with them.
Old Mar 31, 2009 | 06:03 PM
  #30  
Charles R. Hill's Avatar
Owner of BHR
iTrader: (7)
 
Joined: Nov 2003
Posts: 4,101
Likes: 45
Originally Posted by Fluid Motorsports
No need new coil packs on the way that actually work for forced induction applications!
I see you have consistently avoided any technical discussion on the matter and, instead, prefer to make side-handed comments based on nothing substantive. Good work, Junior.
Old Mar 31, 2009 | 06:06 PM
  #31  
blackenedwings's Avatar
Life begins @ 30 psi
 
Joined: Mar 2008
Posts: 1,745
Likes: 0
From: Columbia, MD
Ironically enough I was actually interested in something Fluid was selling recently, but I will not buy anything from him at this point. I cannot comprehend how any sane person would think trolling a customers request thread for a competitors product by name would be a good idea. Are you on crack?
Old Mar 31, 2009 | 06:13 PM
  #32  
Charles R. Hill's Avatar
Owner of BHR
iTrader: (7)
 
Joined: Nov 2003
Posts: 4,101
Likes: 45
Well, it's not like we at BHR have never done the same thing. Except we weren't trying to do a drive-by product promotion. The important distinction is that we are pretty hardcore in our willingness to express our engineering/technical perspectives and we try to encourage debate amongst we vendors, and for good reason. Although our seemingly aggressive nature may make some uncomfortable, we would rather allow all of you to see the various opinions we vendors have and allow you the chance to decide for yourselves which perspectives and philosophies you are most comfortable. Thus, you can be most-informed in your purchasing decision(s). BHR has a distinct philosophy which guides us and it is interwoven in every post we make. I would also like to point out that there are a few vendors with whom we get along and actually SHARE technical information. The difference is that these other vendors were nice enough to ask and we all respect one another's "space" around here.
Old Mar 31, 2009 | 09:44 PM
  #33  
Race Roots's Avatar
Former Sponsor
iTrader: (64)
 
Joined: Sep 2008
Posts: 2,364
Likes: 0
From: Florida
Originally Posted by Charles R. Hill
Well, it's not like we at BHR have never done the same thing. Except we weren't trying to do a drive-by product promotion. The important distinction is that we are pretty hardcore in our willingness to express our engineering/technical perspectives and we try to encourage debate amongst we vendors, and for good reason. Although our seemingly aggressive nature may make some uncomfortable, we would rather allow all of you to see the various opinions we vendors have and allow you the chance to decide for yourselves which perspectives and philosophies you are most comfortable. Thus, you can be most-informed in your purchasing decision(s). BHR has a distinct philosophy which guides us and it is interwoven in every post we make. I would also like to point out that there are a few vendors with whom we get along and actually SHARE technical information. The difference is that these other vendors were nice enough to ask and we all respect one another's "space" around here.
Interesting stand point, I would prefer we not engage each like we have, doesn't seem to be beneficial to the community. I think all the drama has caused more issues than anything. I am just flat out tired of being constantly attacked by the BHR crew, the comments made from my standpoint currently were rash and not necessary.

Lets see if this will change for the better instead of constantly undermining each other and their customers.
Old Mar 31, 2009 | 09:58 PM
  #34  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,286
Likes: 184
From: A Pacific Island.
Closed.

Mods will discuss what action to take......

S
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RotisserieEngine
RX-8 Parts For Sale/Wanted
21
Jan 12, 2017 10:12 PM
rotorocks
Series I Tech Garage
47
May 11, 2016 03:23 PM
PTQLam
Series I Aftermarket Performance Modifications
4
Aug 16, 2015 05:40 PM
cschoeps
RX-8's For Sale/Wanted
0
Aug 6, 2015 12:44 PM
dbarber
Series I Trouble Shooting
14
Jul 25, 2015 01:34 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 08:04 AM.