Rx8 turbo cosmo conv
#1
New Member
Thread Starter
Join Date: Aug 2014
Location: South africa Johannesburg
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Rx8 turbo cosmo conv
Hi need some info my rx8 got a cosmo 13 b with GT45 turbo conv but my rev counter is giving issues and this mabe why my electric power steering is going off anyone who knows where i can look or start to find issue ?
#2
FULLY SEMI AUTOMATIC
iTrader: (9)
the cosmo had a 20b
#4
Registered
Join Date: Nov 2009
Location: Adriatic Paradise
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
If you use the Renesis chopper wheel, the metal disc on the front of the Eccentric shaft and ensure it is mounted in the correct orientation along with the Eccentric shaft sensor, the Tacho will work fine.
Depending which year of manufacture,the Cosmo was equipped with a 12a, 13B resi, 13b re and a 20b rew,along with several piston engines.
Depending which year of manufacture,the Cosmo was equipped with a 12a, 13B resi, 13b re and a 20b rew,along with several piston engines.
Last edited by CRO8TIA; 01-07-2015 at 10:35 AM.
#7
New Member
Thread Starter
Join Date: Aug 2014
Location: South africa Johannesburg
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Rx8
hi okay ill try to start , it running michrotech lt10c , its wired so that the original computer is still in my car that needs a signal from crank to make the old comp think its still working everything , now for some od reason my rev countre only goes up to 6500 rpm and suddenly stops and starts working again i did replace the sensor and holder but no luck ( and my steering also suddenly not working so i dont know if its related ! )
#9
FULLY SEMI AUTOMATIC
iTrader: (9)
didnt know that. thanks for the info
Thread
Thread Starter
Forum
Replies
Last Post
Mxttz0r
New Member Forum
34
07-05-2019 03:19 AM
UHATEIT
Series I Trouble Shooting
11
03-31-2019 05:31 PM
PotatoCannon
New Member Forum
13
09-06-2015 11:48 AM