Banzai Racing REW swap engine mount option :)
#5
SARX Legend
Thread Starter
iTrader: (46)
I would never buy anything from rx8performance, I like to receive what I pay for. But I agree stainless is better than E coated steel (no idea what type of steel) I guess.
#7
No respecter of malarkey
iTrader: (25)
The *other guy* has poly bushings built into the brace. Not knocking Banzai, but we all know 9k's relentless intent on the subject regardless of how many people ordered & received their mount with no misses.
I don't care for the center piece held in by two bolts. It's not as structurally correct or as strong that way. Is it really that much trouble to remove 6 bolts that thread in directly rather than two bolts that also have loose nuts & washers? They have it marked as $500 retail and discounted to $395, pretty funny ...
I don't care for the center piece held in by two bolts. It's not as structurally correct or as strong that way. Is it really that much trouble to remove 6 bolts that thread in directly rather than two bolts that also have loose nuts & washers? They have it marked as $500 retail and discounted to $395, pretty funny ...
#8
SARX Legend
Thread Starter
iTrader: (46)
We will just have to see how it performs.
And regardless of me, the "other guy" is doing a fine job on his own recently of living up to his shitty reputation. But we can leave that discussion for the incoming bad guys threads.
And regardless of me, the "other guy" is doing a fine job on his own recently of living up to his shitty reputation. But we can leave that discussion for the incoming bad guys threads.
Last edited by 9krpmrx8; 06-04-2014 at 11:06 PM.
#9
Registered
iTrader: (1)
Join Date: Jun 2009
Location: Paramaribo, Suriname ( South America )
Posts: 697
Likes: 0
Received 0 Likes
on
0 Posts
Mod Edit:
Calm down. Bumping a 3 month old thread to rant over someone that isn't even involved in the thread is uncalled for.
-RIWWP
2nd post deleted. Take it to a bad guy thread. This isn't the thread to vent about the person you are targeting.
Calm down. Bumping a 3 month old thread to rant over someone that isn't even involved in the thread is uncalled for.
-RIWWP
2nd post deleted. Take it to a bad guy thread. This isn't the thread to vent about the person you are targeting.
Last edited by RIWWP; 09-02-2014 at 05:36 PM.
#11
Gulf Coast Rotaries
iTrader: (1)
I'm looking into a Rew on my 8 once I'm done with my 1st gen . I think next month I'm going to part out my 8 completly and start fresh. Complete Engine on my 8 that was rebuilt, Suspension , Rays wheels , Then start first buying Mount then Engine and go from their. Is their a thread on your build or another built for a Rew swap. If I can get some decent money back for my 8 I will sell complete and buy a shell and start from their.
thanks
#12
Renesis out... REW in
iTrader: (3)
I don't have a build thread, here are a couple REW builds below.
They both have excellent info about REW swapped RX-8's.
Schartz thread,
https://www.rx8club.com/series-i-maj...-build-230579/
Arca's thread
https://www.rx8club.com/frankenstein...w-swap-249808/
You can also pm me with questions
G/L
.
Last edited by firecran; 09-23-2014 at 11:10 AM.
#13
Gulf Coast Rotaries
iTrader: (1)
Chino,
I don't have a build thread, here are a couple REW builds below.
They both have excellent info about REW swapped RX-8's.
Schartz thread,
https://www.rx8club.com/series-i-maj...-build-230579/
Arca's thread
https://www.rx8club.com/frankenstein...w-swap-249808/
You can also pm me with questions
G/L
.
I don't have a build thread, here are a couple REW builds below.
They both have excellent info about REW swapped RX-8's.
Schartz thread,
https://www.rx8club.com/series-i-maj...-build-230579/
Arca's thread
https://www.rx8club.com/frankenstein...w-swap-249808/
You can also pm me with questions
G/L
.
I got a couple side jobs to do and finish Fuel line on my Rx-7 then I can focus and figure out how Im going to do this in the same time I'm going to be looking for house to buy with a Big garage or enough yard to build one so it may take me time but it will get done , I need my space to speed up this dam process ., Not having room in my garage I cant invest on more tools I need to speed up my Projects.
Thanks And hope to see you again in another meet
Thread
Thread Starter
Forum
Replies
Last Post
Audio Concepts ATL
New Member Forum
21
09-26-2021 01:59 PM