Bad rx8
#5
Registered
iTrader: (2)
A nice BNR Stage 3 S5 turbo setup would be a really nice setup. Along with a microtech or PowerFC. You could be looking at some very respectible numbers with all the right supporting mods. Around 300-350whp easy on a very nice tune.
You'll miss the 9k rpm redline, but the torque makes up for it :P
You'll miss the 9k rpm redline, but the torque makes up for it :P
#7
Registered
Thread Starter
Join Date: Jul 2007
Location: Australia
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the comments guys. the motor i will be using is a 13bt cosmo, and i will miss the sweet buzzing at 9k rpm but hopefully some good power will make up for it
#13
Registered
Thread Starter
Join Date: Jul 2007
Location: Australia
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
thanks for taking an interest, so far my plans are to just finish the car, at the moment it will be a street car and maybe later when i get tired of trying to keep registration on it then i will convert into a track only car, i live in Aus and its not cheap to build a car here, it would have cost twice as much to build a 20b.
this is the cros member being designed and the upper inlet manifold has to be shifted 2 inches forward to clear the fire wall, a custom lower section needs to be fabricated.
this is the cros member being designed and the upper inlet manifold has to be shifted 2 inches forward to clear the fire wall, a custom lower section needs to be fabricated.
Last edited by GRUMP8; 06-09-2011 at 06:15 AM.
#20
^can someone tell me more about the 13bt, I don't think I have heard of it before. What makes it better than a 13b? I assume it is more than just a turbo, otherwise you could just strap that onto a regular 13b...
thanks
Cool project btw
thanks
Cool project btw
#21
Registered
Thread Starter
Join Date: Jul 2007
Location: Australia
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
installing a 20b is a much more complicated job and here in Aus literally costs twice as much. sorry for confusing with reference to 13bt, the t is just for turbo.
diference between turbo and NA is engine compression otherwise pretty much same motor. as you can see in one of the pics i am using a 13B from a Mazda/Eunos Cosmo which comes standard as a twin turbo engine. for this project i will be using a single turbo.
diference between turbo and NA is engine compression otherwise pretty much same motor. as you can see in one of the pics i am using a 13B from a Mazda/Eunos Cosmo which comes standard as a twin turbo engine. for this project i will be using a single turbo.