Holiday Pricing!!
11-18-2006, 06:57 PM
#9
In Exile
Join Date: Jul 2004
Location: North of Orlando
Posts: 461
Likes: 0
Received 0 Likes
on
0 Posts
Installation is cake...
Remove OEM ****. You can do it like I did (by hand –make sure your hands are dry) or use a pliers (place a protective layer of some form over the stock **** as you don’t want to leave any marks –pet peeve).
1.Pull **** outward to remove. Try not to wiggle or push side wards.
2.Once **** is removed. Locate the D-ring that keeps it in place.
3.Place D – ring on new ****.
4.Once D ring is in place. Align D ring for installment. Press firmly (again no wiggling ) until **** is in place.
5.Place sticker on new ****. (You have 2 choices, Pettit or Rx8 logo.)
Mission accomplished.
-------------------------------------
I've had mine for 4+ months and I love it!
Remove OEM ****. You can do it like I did (by hand –make sure your hands are dry) or use a pliers (place a protective layer of some form over the stock **** as you don’t want to leave any marks –pet peeve).
1.Pull **** outward to remove. Try not to wiggle or push side wards.
2.Once **** is removed. Locate the D-ring that keeps it in place.
3.Place D – ring on new ****.
4.Once D ring is in place. Align D ring for installment. Press firmly (again no wiggling ) until **** is in place.
5.Place sticker on new ****. (You have 2 choices, Pettit or Rx8 logo.)
Mission accomplished.
-------------------------------------
I've had mine for 4+ months and I love it!
11-18-2006, 11:14 PM
#10
II SOCIETY
Join Date: Nov 2006
Location: The Bay Area
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rx8honey
Installation is cake...
Remove OEM ****. You can do it like I did (by hand –make sure your hands are dry) or use a pliers (place a protective layer of some form over the stock **** as you don’t want to leave any marks –pet peeve).
1.Pull **** outward to remove. Try not to wiggle or push side wards.
2.Once **** is removed. Locate the D-ring that keeps it in place.
3.Place D – ring on new ****.
4.Once D ring is in place. Align D ring for installment. Press firmly (again no wiggling ) until **** is in place.
5.Place sticker on new ****. (You have 2 choices, Pettit or Rx8 logo.)
Mission accomplished.
-------------------------------------
I've had mine for 4+ months and I love it!
Remove OEM ****. You can do it like I did (by hand –make sure your hands are dry) or use a pliers (place a protective layer of some form over the stock **** as you don’t want to leave any marks –pet peeve).
1.Pull **** outward to remove. Try not to wiggle or push side wards.
2.Once **** is removed. Locate the D-ring that keeps it in place.
3.Place D – ring on new ****.
4.Once D ring is in place. Align D ring for installment. Press firmly (again no wiggling ) until **** is in place.
5.Place sticker on new ****. (You have 2 choices, Pettit or Rx8 logo.)
Mission accomplished.
-------------------------------------
I've had mine for 4+ months and I love it!
Also, it looks like it lights up? You don't have to wire anything to power?
11-19-2006, 03:18 PM
#12
In Exile
Join Date: Jul 2004
Location: North of Orlando
Posts: 461
Likes: 0
Received 0 Likes
on
0 Posts
Phantom Menace: Yes it does light up. It lights up when your headlights are on. No wiring required. The illumination from the lights that light up your CD player etc. luminates in 3 points on the ****.
PS: thanks for the compliment
PS: thanks for the compliment
11-19-2006, 03:25 PM
#13
II SOCIETY
Join Date: Nov 2006
Location: The Bay Area
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rx8honey
Phantom Menace: Yes it does light up. It lights up when your headlights are on. No wiring required. The illumination from the lights that light up your CD player etc. luminates in 3 points on the ****.
PS: thanks for the compliment
PS: thanks for the compliment
No, no....Thank you!
12-07-2006, 12:58 PM
#24
roxy
Join Date: Aug 2006
Location: chandler, az
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
my factory **** was very tough to get off, so my husband got it for me with a soft cloth and a pair of pliers. my new one looks great. i recommed that every rx-8 owner purchase one.
12-08-2006, 05:49 PM
#25
6 spd Newbie
iTrader: (1)
Join Date: Mar 2006
Location: Staten Island, NY
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
just got mine and its great...only problem is i put the sticker on a little cockeyed and went to pull it off to reposition and ripped the pettit one in half...so now im using the rx-8 one...wanted to have the pettit one on there.