L33 T56 Swap
#51
ROTARY FANATIC
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: Houston, Tx
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Another small update the accessory’s arrived today ls6 water pump, tensioner, compressor and CTS-V alternator. Also got the 90mm ls7 throttle body in and ported out. I will be ordering headers from Hinson Monday hopefully there are no issues with that, and I’m Still waiting on the Transmission from the dealer. I just need those two things to show up so I can start fabricating the mounts.
#52
please wait for the beep
iTrader: (5)
Good choice. They can make a lot of power and the heads breathe really well. It would be my choice of engine as well. Plus no "LSx tax."
325 Chevy Small Block Engine - Bolt On A Cam And Heads And Add 120+HP - Car Craft Magazine
#53
Good choice. They can make a lot of power and the heads breathe really well. It would be my choice of engine as well. Plus no "LSx tax."
325 Chevy Small Block Engine - Bolt On A Cam And Heads And Add 120+HP - Car Craft Magazine
325 Chevy Small Block Engine - Bolt On A Cam And Heads And Add 120+HP - Car Craft Magazine
#55
Registered
iTrader: (2)
I think BH Factory that is doing the LS2 swap in the other thread used some of Hinsons kit. I think TF Works did as well on the S2 LS swap they did. If I'm not mistaken both had to modify the Hinson parts though.
You may want to contact them to see if they can provide any useful info on their builds and what they may have needed to modify.
You may want to contact them to see if they can provide any useful info on their builds and what they may have needed to modify.
#56
ROTARY FANATIC
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: Houston, Tx
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I think BH Factory that is doing the LS2 swap in the other thread used some of Hinsons kit. I think TF Works did as well on the S2 LS swap they did. If I'm not mistaken both had to modify the Hinson parts though.
You may want to contact them to see if they can provide any useful info on their builds and what they may have needed to modify.
You may want to contact them to see if they can provide any useful info on their builds and what they may have needed to modify.
#58
ROTARY FANATIC
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: Houston, Tx
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I have a tig and a header building kit, but I don't have the extra time it takes to build them. I thought about it tough and it might still happen if I can’t get them from Hinson.
Last edited by rx8fab; 06-23-2013 at 05:57 PM. Reason: incomplete
#64
I guess he couldn't deliver that promise? If so, that's too bad. I never got to see a complete LS swapped RX8 in person.
#65
You gonna eat that?
iTrader: (1)
#66
After 66 months since last Post any updates ?
Insane build hope he finished it , many of us with the doubt if he ever did after 66 months , after so much investment and theory Im not even sure if any other members followed thru and finished this set up would be amazing though , just disappointed along with the rest after reading 3 pages and the mystery continues lol 😂 well cheers to anyone to update this Frankenstein Thread with any news 🍻
#67
Could it be ?
Did some research on a L33 swap and somehow this showed up , not sure if it’s the same person but after watching the videos and post had to share this , in my opinion sounds f*n insane 💪🏼💪🏼💪🏼🔥🔥🔥 great built and work , although this website post was nearly 3 years ago but it shows a complete L33 build
https://forums.nasioc.com/forums/sho....php?t=2781121
https://forums.nasioc.com/forums/sho....php?t=2781121
Thread
Thread Starter
Forum
Replies
Last Post
TurboLS2rx8
New Member Forum
25
11-02-2014 07:48 AM