angeljoelv

We still working on the blue one. Always trying to make it a bit better..

angeljoelv

Busy day today

good_s

don't listen anyone why say that 2jz is not for rx

look on my experience and if you have questions please welcome..

read my journal
Mazda RX-8 2jz 4wd robot trans | TheDriveBook

angeljoelv

angeljoelv

Long jurney ahead, but we are making progress.

yokohamaboi

iTrader: (1)

Looks like a tight fit. Plus you could run the intercooler through the factory intake hole

dznutzuk

Nice nice, how did everything fit with the power steering? Might be interested in some engine mounts once you geti them done. Looks like I have to get rid of my bre engine, since I have no one to tune it. At least there are a ton of piston tuners here.

angeljoelv

DMaverickRX8

iTrader: (1)

Looks sick man. May I ask what is up w the 4 port?

angeljoelv

the 4 port Motor is low on compression. Im going to rebuild it and maybe sell it later.

yokohamaboi

iTrader: (1)

awesome! Any issues with firewall clearance?

angeljoelv

Not at all. The crossmember and steering rack is an other story

200.mph

iTrader: (9)

looking good angel. you know if your bored, instead of playing with pistons you could swap a b re, b rew, or 20b in my car lol

yokohamaboi

iTrader: (1)

did you have to relocate it? or oil pan is hitting?

angeljoelv

We used a steering rack from another car. We had the steering pump with the motor so we didnt have to worry about that. I will let u know once the car is on the road if it works good.

angeljoelv

angeljoelv

angeljoelv

I8yourv8

what kind of numbers are you going for with this project?

DMaverickRX8

iTrader: (1)

Mad skills I'm jealous

angeljoelv

4-500 whp range.

angeljoelv

Once everything is in place, we are taking it apart and making some cosmetic adjusments. All fab work on this project (engine, tranny and rear end mounts and braces) was done by RAW. Rich Auto Works. So we can't thank him enough for all his amazing work. Its still a long road ahead for us here at the shop but i think at the end it will all be worth it.

9krpmrx8

iTrader: (46)

Nice work. Get it right, get it tight.

AlShinka

Man I really dig this swap...I'll do this once the renesis lets me down

angeljoelv

We originally were staying twins but at some point after we started the swap desided on going single. So it changes a little the original plan but thats how things go.