Where does this vacuum line go? It was cut when i got it, and can't find any info anywhere

 

looks like you are pointing to a sensor not a vac. line

 

Yes. The vacuum line connected to that solenoid or sensor

 

That's the baro sensor. It's not attached to anything. It has a small section of rubber tube cut at an angle on it

 

Oh cool man thank you very much! How about this tee?

 

that tee doesnt look factory. whats it connected to?

 

That looks like the vac line that goes from the LIM nipples and to the Vent line that attaches to the oil filler vent. It was added as a way to get better condensation removal to stop the milky dipstick problem. I know it was a TSB in Canada and an alteration they did in 05 or 06 to the 04+ cars

 

One end goes to the filler neck, and the other goes to one of the small nipples on the lower intake manifold. I agree it's odd. I just looked at the intake that came with the original motor, and both of the small nipples had rubber caps on them. I'm confused

 

See above

 

So the other nipple should go on the tee?

 

yep....

 

Thanks a bunch, buddy