Notices
New Member Forum A place for new members to get their feet wet

Question about factory radio replacement and key fob

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 02-15-2016, 03:45 PM
  #1  
Registered
Thread Starter
 
stel10s's Avatar
 
Join Date: Feb 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Question about factory radio replacement and key fob

hi to all i am new here.
i have a 2004 japanese imported mazda rx8 with japanese frequencies range radio (76.0-90.0 mhz) and my question is if i buy a factory radio european one from ebay or for someone else should it work?
my second question is that i have only one key with a separate 3key remote, could i buy a Replacement 3 button remote flip key case and install mine there?
long story short, if i replace my factory radio with other factory radio will work?

Last edited by stel10s; 02-15-2016 at 07:38 PM.
Old 02-16-2016, 04:58 AM
  #2  
Registered
 
mhedges's Avatar
 
Join Date: Feb 2016
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Welcome aboard!

You didn't specify your location, but your profile says CY, so I'm guessing Cyprus!

I would be more concerned about obtaining the key remote. There are plenty of factory radios with different frequencies in eBay, either original used or aftermarket new. If the remotes are also region-specific, though, then you might have to source it from Japan as well.

Let us know how it goes. Good luck!
Old 02-16-2016, 07:25 AM
  #3  
Registered
Thread Starter
 
stel10s's Avatar
 
Join Date: Feb 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
yes i am from cyprus. so if i remove my head unit and put other one it will work fine?
Old 02-16-2016, 07:45 AM
  #4  
Registered
 
mhedges's Avatar
 
Join Date: Feb 2016
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
It may work, but there may be a possibility only the head unit works, not the steering wheel. I hope I am wrong concerning the steering wheel.

Can any other forumer chime in?
Old 02-16-2016, 07:49 AM
  #5  
Registered
Thread Starter
 
stel10s's Avatar
 
Join Date: Feb 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
if i will do it i need to be sure that all will work.
Old 02-16-2016, 09:26 AM
  #6  
Moder8
iTrader: (1)
 
04Green's Avatar
 
Join Date: Aug 2009
Location: Oviedo, Florida
Posts: 2,578
Received 49 Likes on 31 Posts
In the US there are two different head units, BOSE and not BOSE. They care not interchangable. The levels coming out of the amp are different, higher on the not BOSE unit, a lot higher. There are no visible differences on the units. I think the part numbers are different, by like one digit. If I can find my not BOSE, I will look at the part number and post it. Other than that, there are likely more challenges that I do not know about, but I do know about this one. Check your audio system by looking for the name BOSE on the amp in the trunk.
Old 02-16-2016, 09:36 AM
  #7  
Registered
Thread Starter
 
stel10s's Avatar
 
Join Date: Feb 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
i know that.i have the bose system. i will replace bose head unit with another bose head unit.
is this ok? does anyone do it?
Old 02-16-2016, 10:05 AM
  #8  
Moder8
iTrader: (1)
 
04Green's Avatar
 
Join Date: Aug 2009
Location: Oviedo, Florida
Posts: 2,578
Received 49 Likes on 31 Posts
My guess, emphasis on the word GUESS, is that BOSE for BOSE will be as good in Cyprus as it is in the US. Best I can offer though.
Old 02-16-2016, 05:51 PM
  #9  
Registered
Thread Starter
 
stel10s's Avatar
 
Join Date: Feb 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
is there a way to identify a unit if it is bose or not from the serial number?

Last edited by stel10s; 02-17-2016 at 04:25 PM.
Old 02-17-2016, 04:25 PM
  #10  
Registered
Thread Starter
 
stel10s's Avatar
 
Join Date: Feb 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
???
Old 02-18-2016, 06:10 PM
  #11  
Registered
Thread Starter
 
stel10s's Avatar
 
Join Date: Feb 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
So my next question is:


i have this key and it is my only one, does anybody knows if i can transfer the chip and blade on the case below?
Old 02-18-2016, 06:16 PM
  #12  
Registered
Thread Starter
 
stel10s's Avatar
 
Join Date: Feb 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
https://www.rx8club.com/series-i-int...2/#post3778629

also does anyone recognize the location of these wires because i would like to do the this mod
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MichaelBrown
RX-8 Discussion
17
03-24-2008 10:10 AM
subduedracer
RX-8 Discussion
5
04-16-2005 01:13 PM
mike0615
West RX-8 Forum
4
02-18-2005 02:34 AM
TALAN7
RX-8 Discussion
87
08-05-2004 12:51 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Question about factory radio replacement and key fob



All times are GMT -5. The time now is 01:34 PM.