Notices
New Member Forum A place for new members to get their feet wet

new rx8 owner

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 11-27-2017, 02:20 PM
  #1  
New Member
Thread Starter
 
maddog2727's Avatar
 
Join Date: Nov 2017
Location: Bournemouth
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
new rx8 owner

hi everyone am new rx8 owner brought 2005 blue rx8 with recent engine rebuild as well as lot of new parts fitted
first question is bloke had oil bottle fitted with rx8 plate under hood but never plumbed it in how would i go about plumbing it in instead of premix
second question have got hold of rx8 pz prodrive exhaust rear part would i need to remap ecu if i fit back part of it
thanks for help in advance
Old 11-27-2017, 02:30 PM
  #2  
The Blue Blur
iTrader: (3)
 
sonicsdaman's Avatar
 
Join Date: Apr 2010
Location: Green Hill Zone Running in Loops
Posts: 1,857
Received 3,610 Likes on 2,573 Posts
first welcome
second read the new owners thread about 12 times. no really read this!

after all that, find out what kind of "oil bottle" it is. catch can? sohn adapter? etc.
is the exhaust a cat back only? or is it a mid pipe? the only reason to have to re-tune with an exhaust is a header to squeeze out ~ .2 hp or mask the CEL for the cat
Old 11-27-2017, 03:03 PM
  #3  
New Member
Thread Starter
 
maddog2727's Avatar
 
Join Date: Nov 2017
Location: Bournemouth
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
sonicsdaman here is picture of tank its the little tank to right also the pz prodrive exhaust will be fitted after the cat
Old 11-27-2017, 06:55 PM
  #4  
Modulated Moderator
iTrader: (3)
 
dannobre's Avatar
 
Join Date: Feb 2004
Location: Smallville
Posts: 13,718
Received 334 Likes on 289 Posts
Cat backs and intakes are well within the self adjusting parameters of the stock ECU.

To get better performance from them a retune is great...but no more necessary than doing it on a stock car
Old 12-02-2017, 06:46 AM
  #5  
New Member
Thread Starter
 
maddog2727's Avatar
 
Join Date: Nov 2017
Location: Bournemouth
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
thanks its the sohn adapter but only have the tank
i know shouldnt be asking in this thread but wont let me do a wanted post as am new to site am looking for second hand SAMCO Silicone Coolant Hose Kit and radiator as mine has just gone
Old 12-02-2017, 11:20 AM
  #6  
Registered
iTrader: (1)
 
Loki's Avatar
 
Join Date: Jun 2009
Location: Montreal
Posts: 7,730
Received 957 Likes on 835 Posts
You need to buy the Sohn adaptor itself from rotaryaviation.com https://www.rotaryaviation.com/store..._Adapters.html

Or check if the owner has installed it already and just not connected the reservoir? Take out the battery and the battery box and look toward the bottom of the engine. You should see a black component with some wires and connectors. If it has an aluminium block in the middle of it and that aluminium block has a brass hose connector pointing upward from it, that is the Sohn adaptor and you should probably not drive the car until you have that plumbed to the oil container.

If you don't see anything like that, you'll need to buy it, or just skip on the whole thing and let the stock OMP do its thing. Eitherway, it is not an alternative to premixing.



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 01:11 PM.