Casey Gilstrap

My clutch is sticking to the floor and the piston in the master isn't retracting all the way out when I pull the clutch peddle out unless I release pressure by opening the bleeder valve on the slave. The slave and the master are both new.

dannobre

iTrader: (3)

Bleed it again....

Casey Gilstrap

I've bled 2 bottles through it

dannobre

iTrader: (3)

Try a pressure bleeder. Often you can have a bubble that seems to bypass and not want to come out. It is a brutal clutch to bleed.

TeamRX8

iTrader: (25)

Sounds to me like air is stuck in the master, typical if you replace it. Did you fill and bleed it before installing it?