Notices
New Member Forum A place for new members to get their feet wet

Lumpy Steering problem

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 03-19-2014, 11:10 AM
  #1  
New Member
Thread Starter
 
cj156's Avatar
 
Join Date: Feb 2013
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Lumpy Steering problem

Hi guys

this is my first post and i know its probably in the wrong place but didnt know where else to put it!

having an intermittent problem with the power steering on my 04 rx8

when turning the wheel it feels as if no power steering for 1/4 turn then turns easy as if power steering active for next 1/8 turn then back to feeling as if no power steering

No warning indcators on dash saying anything has failed but been driving the car fine for last 12 months with no issues at all

Is this likely to be the connectors under the air box issue? They look pretty clean and no signs of any coolant overflows anywhere

Any help would be appreciated as dont want to waste time chasing a problem that someone else can point me staright to !

Also, if anyone can direct this post to the appropriate place would be much appreciated

Thanks
Old 03-19-2014, 11:12 AM
  #2  
Registered
iTrader: (2)
 
RIWWP's Avatar
 
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 240 Likes on 110 Posts
This IS the right place to put the thread, since you are a new member.

That's the wrong title though, so I'm changing it. The rules state that titles must be informative of what is in the thread, we shouldn't have to open the thread to see what the topic is. Please rerefresh your memory of the rules by re-reading them here: https://www.rx8club.com/faq.php?faq=...q_user_conduct


Your problem could be dirty connectors, however that sounds exactly like the issue I had when my lower steering shaft u-joint failed. See my DIY thread here for how to re-lubricate it: https://www.rx8club.com/series-i-do-...easing-215141/
However, keep in mind that it probably won't solve the problem for more than a little bit, as a failed bearing is a failed bearing. You will likely need to replace it: https://www.rx8club.com/series-i-do-...cement-217115/

Last edited by RIWWP; 03-19-2014 at 11:15 AM.
Old 05-25-2014, 12:14 PM
  #3  
even my plates are tinted
 
black PL 8's Avatar
 
Join Date: Sep 2009
Location: Chicago, IL
Posts: 84
Received 0 Likes on 0 Posts
Am having the same issue - turning is: easy, hard, easy, hard, etc. I'll have to look at your DIY next; I should have read this 1 day earlier while i had everything torn apart putting on new springs.

Could this have been from some nasty pothole-type issue? I seem to have busted my both front springs, endlinks, and this steering issue - roughly in the same time frame...but I dont recall hitting anything THAT severe
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Carbon8
RX-8's For Sale/Wanted
42
02-27-2020 08:39 AM
Prescription 8
Non-Rotary Swaps
117
02-14-2018 12:07 PM
garethleeds
Europe For Sale/Wanted
6
11-19-2015 06:32 AM
nivong
Europe For Sale/Wanted
0
09-02-2015 07:54 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Lumpy Steering problem



All times are GMT -5. The time now is 09:20 PM.