Ecm n3k6
12-22-2021, 06:11 PM
#2
What are you trying to figure out?
If you are wondering what to do with your relay connection issue... you would have the best cost/ benefit ratio to repair the connector under the relay. If you do it properly it will be as good as new and not require replacing the main and front harness and redoing all the connections
If you are wondering what to do with your relay connection issue... you would have the best cost/ benefit ratio to repair the connector under the relay. If you do it properly it will be as good as new and not require replacing the main and front harness and redoing all the connections
12-22-2021, 07:02 PM
#3
Registered
Thread Starter
trying to find out the voltage to the relay to see if its sending. that make sense. and its the fuel realy. thought i had this yesterday we fixed the connection but the low flow fuel is not working and we are testing the resistor as well. LOKI told me to do this but i couldnt find it..i finally did hidden under some foam.
Thread
Thread Starter
Forum
Replies
Last Post
Bighurk
Series I Interior, Audio, and Electronics
10
01-25-2009 06:36 PM
WikkedOne
Series I Interior, Audio, and Electronics
3
10-25-2008 02:41 AM