So I just got a new set of bhr ignition coils and wires and they all work fine. I got my car running but it will not stay running when I try to let it idle. Compression is good, airpump delete was done to this car, only code I have is p2259 secondary air injector circuit low. Please help me out I just got the car over the weekend

 

Sounds like a vacuum leak. Your intake needs to be airtight after the MAF. Look for open holes, split hoses, etc. Do you have an aftermarket intake and if so, which one?

There are many threads like this.

 

On top of all things Loki mentioned , I am guessing you disconnected the battery to change the coils. Car will take some time to re learn its idle after a disconnect might even need to reset ESS

 

so he put a shitty aftermarket intake on it and I haven’t had the money to buy a new one, but till idle while it’s warming up then it’ll fluctuate up and down u til it kills itself or when I get it gas and it goes back down to idle it wants too die

 

Yep shitty intakes will do that, get it back to stock or to AEM or Racing Beat soon as you can.
MEanwhile you can compare your vacuum routing to what it's supposed to look like https://www.rx8club.com/series-i-tec...iagram-214910/

Open hoses will also cause these types of problems, the intake needs to be airtight after the MAF. If they removes the intake, they probably left the VFAD nipple under the throttle body open.

 

sorry for the months late reply I gave up for awhile but never saw the vfad message. Didn’t even think of this man and I was just messing with the car today. I’ll take a look and get back to you!

 

it happens too be covered