Notices
New Member Forum A place for new members to get their feet wet

Cutting out at optimal temp.

Thread Tools
 
Rate Thread
 
Old Jun 2, 2017 | 09:49 AM
  #1  
Casper11's Avatar
Thread Starter
New Member
 
Joined: May 2017
Posts: 1
Likes: 0
Cutting out at optimal temp.

Hi guys I just got myself a 2003 and I run in to small issue basically car starts first time when cold no problems and runs spot on till it gets to operating temperature once its there engine cuts out completly new engine was fitted 4500 miles ago
any ideas what it might be?
Reply
Old Jun 2, 2017 | 09:55 AM
  #2  
sonicsdaman's Avatar
The Blue Blur
iTrader: (3)
 
Joined: Apr 2010
Posts: 1,959
Likes: 4,812
From: Green Hill Zone Running in Loops
first welcome to the club
second if you haven't yet read the new owners thread about 10 times then re-read it New/Potential owners start here
third there is no such thing as a "new" engine just rebuilt/reman
fourth are you sure that the replaced engine has sufficient comp#s and was properly installed?
fifth how are you watching the temp? is it the dummy gauge on the dashboard?
sixth will it start again when it is warmed up?
Reply
Old Jun 8, 2017 | 07:24 AM
  #3  
Grace_Excel's Avatar
Charles Bundy
iTrader: (5)
 
Joined: Jun 2010
Posts: 2,395
Likes: 7
From: Sherman Oaks, CA
Must be on limp mode, for how long and how many miles have you driven since this happened, any CEL? Have it read.
Reply
Old Jun 8, 2017 | 01:03 PM
  #4  
Reoze's Avatar
Registered
 
Joined: Feb 2017
Posts: 448
Likes: 50
From: Austin, TX
Originally Posted by Casper11
Hi guys I just got myself a 2003 and I run in to small issue basically car starts first time when cold no problems and runs spot on till it gets to operating temperature once its there engine cuts out completly new engine was fitted 4500 miles ago
any ideas what it might be?
just speculating here. To me it sounds like it might be dying when it switches from open to closed loop. Which happens as the car is warmed up. Closed loop is primarily driven off of the O2 sensors.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mtmetzger
RX-8's For Sale/Wanted
6
Oct 21, 2017 05:02 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:03 AM.