After I De-flooded the car, i took her for a drive then after 5 minutes driving fine, she backfired and then she now she can barely go 25 mph! I hooked it up to a code reader and she shows: U0101 and C, EV, 2A, O flashes! Help! Lol

 

The U0101 I believe is a CanBus error, I think.

Don't know what the other stuff is

 

They're all communication errors most likely. Try disconnecting your battery for like an hour and doing both the NVRAM and KAM resets.

 

Thanks Legot! I reset NVRAM and KAM by
1. Putting the key in the ignition,
2. Turn to the ACC or ON, but don't start
3. Pumping the brakes about 20 Times for 8 seconds
4. When Reset the oil gauge will jump to hot then back!
5. Turn key OFF, let sit for a moment and then start it up
Ran great!!!
Thank you