04 RX8. After deflooding she started but backfired now codes U0101, C, EV, 2A, O
After I De-flooded the car, i took her for a drive then after 5 minutes driving fine, she backfired and then she now she can barely go 25 mph! I hooked it up to a code reader and she shows: U0101 and C, EV, 2A, O flashes! Help! Lol
|
The U0101 I believe is a CanBus error, I think.
Don't know what the other stuff is |
They're all communication errors most likely. Try disconnecting your battery for like an hour and doing both the NVRAM and KAM resets.
|
All codes cleared
Thanks Legot! I reset NVRAM and KAM by
1. Putting the key in the ignition, 2. Turn to the ACC or ON, but don't start 3. Pumping the brakes about 20 Times for 8 seconds 4. When Reset the oil gauge will jump to hot then back! 5. Turn key OFF, let sit for a moment and then start it up Ran great!!! Thank you |
All times are GMT -5. The time now is 05:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands