NE NJ local meets on Tuesday nights
seebass
iTrader: (4)
Joined: Jan 2008
Posts: 1,004
Likes: 0
From: bloomfield nj now in miami ahhhh back in jersey now jajajjaja
heads up guys really good deal ( ray.al.omar)
https://www.rx8club.com/rx-8-parts-sale-wanted-44/fs-illuminated-shift-knob-leather-shift-boot-190538/
https://www.rx8club.com/rx-8-parts-sale-wanted-44/fs-illuminated-shift-knob-leather-shift-boot-190538/
Registered
Joined: Jan 2007
Posts: 1,401
Likes: 0
From: NJ
damn...that's fast....i like to have a blue RX8 turbo'ed....
you have to hit 300whp at least to be in the elite...sorry bro....you should try it though to get 300, and we will welcome you in our neighborhood which is elite's neighborhood
Benny, i need you to register DGRR for me please....i will pay you when i see you on tuesday
....and don't worry, if your engine fails, i have an extra engine that i will sell it to you for cheap...
are you serious for this one? if you do, i have change my license plate to "lame 8"
I have all seasons ... but its still shitty
Last night I went out to try to have some fun in the snow and discovered the difference between not enough traction and so little traction its just retarded ... i was doing 4mph donuts! but I think I'll rough it out without the sandbags for this season, next year I am getting studded on an extra set of steel rims.
Last edited by stinksause; Feb 3, 2010 at 09:47 PM.
seebass
iTrader: (4)
Joined: Jan 2008
Posts: 1,004
Likes: 0
From: bloomfield nj now in miami ahhhh back in jersey now jajajjaja
if your not 1st your last
Joined: Jan 2004
Posts: 4,889
Likes: 1
From: Jersey & Peru
wow u guys stepped it up.
but unless you make 500 there is no elite
300 is stock on most cars now a days, rotary or not.
but this who has more power means nothing if you cant bring it down to the ground. still I hope everyone the best at reaching there peak
I wont be happy till I run that 35r or just go big 37r
but unless you make 500 there is no elite
300 is stock on most cars now a days, rotary or not.
but this who has more power means nothing if you cant bring it down to the ground. still I hope everyone the best at reaching there peak
I wont be happy till I run that 35r or just go big 37r
if your not 1st your last
Joined: Jan 2004
Posts: 4,889
Likes: 1
From: Jersey & Peru
omar and some of the guys I mentioned this to
instead of the r6v I was gonna jump on this
FML not gonna see a deal like that again
turbo : Garrett GT37r turbo
Intercooler : Precision 750whp Intercooler with mounting tabs
Piping : Custom, all powercoated wrinkle black
Intake : 4 inch custom, powdercoated wrinkle black, AEM Dryflow Filter
Downpipe : 3 inch custom, 2 O2 bungs
Manifold : Full-Race Pro Street
Wastegate : Tial 44m, housing powdercoated TurboX high heat
Wastegate Dump Tube : Custom
Blow Off Valve : Tial
Injectors : RC Engineering 1000cc injectors with clips, and AEM injector Driver
Oil Relocation : Inline Pro, includes all lines and fittings
Misc : Clamps, fitting, lines, everything needed for a bolt on installation.
The only I could see you needing to do is tapping the oil pan for the oil return for the turbo. This is a complete turbo kit that is used, but had NO ISSUES. Bolt on, and have the turbo kit to run 9's and make tons of power!!!! This is proven!!!! And is truely a complete ready to go kit!
This setup has been on the car for this season only. We ran pump gas with AEM's water/meth injection. The car went 9.9 at 141, and made 680whp at 25psi on the dyno. We didn't get back to the dyno when we were running 28psi, but should definitely net over 700whp.
I'll get some pics up later when I have some more time.
$4000 firm, plus shipping.
http://www.s2ki.com/forums/index.php?showtopic=755247
instead of the r6v I was gonna jump on this
FML not gonna see a deal like that again
turbo : Garrett GT37r turbo
Intercooler : Precision 750whp Intercooler with mounting tabs
Piping : Custom, all powercoated wrinkle black
Intake : 4 inch custom, powdercoated wrinkle black, AEM Dryflow Filter
Downpipe : 3 inch custom, 2 O2 bungs
Manifold : Full-Race Pro Street
Wastegate : Tial 44m, housing powdercoated TurboX high heat
Wastegate Dump Tube : Custom
Blow Off Valve : Tial
Injectors : RC Engineering 1000cc injectors with clips, and AEM injector Driver
Oil Relocation : Inline Pro, includes all lines and fittings
Misc : Clamps, fitting, lines, everything needed for a bolt on installation.
The only I could see you needing to do is tapping the oil pan for the oil return for the turbo. This is a complete turbo kit that is used, but had NO ISSUES. Bolt on, and have the turbo kit to run 9's and make tons of power!!!! This is proven!!!! And is truely a complete ready to go kit!
This setup has been on the car for this season only. We ran pump gas with AEM's water/meth injection. The car went 9.9 at 141, and made 680whp at 25psi on the dyno. We didn't get back to the dyno when we were running 28psi, but should definitely net over 700whp.
I'll get some pics up later when I have some more time.
$4000 firm, plus shipping.
http://www.s2ki.com/forums/index.php?showtopic=755247
Bubblicious? DEF.
Joined: Mar 2004
Posts: 4,062
Likes: 0
WOW LOL...
really? isnt that HUGE for the 8? thats beeeeeefy
you have to hit 300whp at least to be in the elite...sorry bro....you should try it though to get 300, and we will welcome you in our neighborhood which is elite's neighborhood
Benny, i need you to register DGRR for me please....i will pay you when i see you on tuesday
Benny, i need you to register DGRR for me please....i will pay you when i see you on tuesday
ill register for you asshat
BUKAKAe!?!?!?!?
wow u guys stepped it up.
but unless you make 500 there is no elite
300 is stock on most cars now a days, rotary or not.
but this who has more power means nothing if you cant bring it down to the ground. still I hope everyone the best at reaching there peak
I wont be happy till I run that 35r or just go big 37r
but unless you make 500 there is no elite
300 is stock on most cars now a days, rotary or not.
but this who has more power means nothing if you cant bring it down to the ground. still I hope everyone the best at reaching there peak
I wont be happy till I run that 35r or just go big 37r
ps kel i want YOU to step your game up, i wanna see you with something up your sleeve for this season!!!
[/QUOTE]sexyyyyyy *** manifold welds look banananans
Didnt go crazy with sfr, mazmart or ptp.....I have the greddy with upgraded turbo (compressor wheel and actuator) and a larger FMIC. Im not shooting for crazy numbers... the 300 club can wait Ill need the garret turbo for the the 3071r i think.
I thought Tuesday u said no FI lol. But I'm def hype now were going to have 2 fI rx8's in TNC.
Bubblicious? DEF.
Joined: Mar 2004
Posts: 4,062
Likes: 0
i just spent 400 last night lol......
TNC
Joined: Oct 2008
Posts: 2,054
Likes: 0
From: New York
heres a vid from My cousin Anthony....
He was practicing burnouts.....
http://sharing.theflip.com/session/5...video/10049058
He was practicing burnouts.....
http://sharing.theflip.com/session/5...video/10049058