Might have been, were you there around 5pm on saturday? It was parked on the food court side. I didnt get a good look, my wife was with me and just said "hey theres your car in black!" I just got a peak while turning the corner.

 

I'll be here most of the day. Feel free to stop in anytime. My 8 is park outside, can't miss it.

 

Good news / Bad news on my weekend RX8 activities. Good news is that I no longer have a coolant leak. I pulled off my upper rad hose and recut it and redid the sensor. I also now have constant power to my gauges so they retain their memory and don't beep constantly at me when I leave my keys in the ignition and the engine off.

Bad news is some of my new coolant hoses either could use the OEM clamps (hoses too big) or wouldn't fit my water temp sensor (hoses too small). Also I pulled out my sensors from their connectors on the water temp so that isn't working anymore (but its not beeping at me!)

The automotic blade fuse taps I got from Radio Shack were too big. They wouldn't fit into the opening for our fuses. So I just rigged a wire in there. Works good enough for me. Oh and I grounded my water temp adapter directly but obviously can't tell if it's helping the temps since the connctors aren't connecting.

I'm gonna get a smaller water temp adapter and some new hose clamps and then redo all my coolant hoses and redo my coolant since most of the water wetter is probably gone and I'm probably down to 20/80 coolant/water.

Still planning on taking her to Nelsons on Saturday. Weather looks like it might be a little dicey though.

PS. Those OEM hose clamps are a PITA to get off or put back on.

 

I feel your pain with the hose clamps. I nicked myself good with one.

 

Ok...I ordered RacingBeat radiator screens. To install I need to pull the front bumper and stuff. When I/we do this...I would like to replace the bulbs for the parking lights and fogs with HIDs. Anyone have suggestions on which I should buy?

 

how much were those screens? i've been considering getting as well, just not put much effort into looking up yet. Could make a day of screen installing if i get them soon / you want to wait.

 

$55 for the three screens and it was either $30 or $35 shipping he wanted.

 

HIDs or LEDs?

 

White light instead of yellow/orange

 

Assuming you're talking about just changing to LEDs, not doing an HID conversion of your foglights...


Avoid autolumination LEDs...

I went back to incandescent bulbs after my flashing blue ones and then my hyper white ones lasted a week...
You can send them back and they'll send you more crappy bulbs....

"I can take a crap in a box and put warranty on there if you'd like, trust me, I'm not that busy"
-Tommy Boy


I don't know how much the front bumper removal will help with the parking lights... its best just to ask megan or someone else with small hands to help. I was able to change mine a few times.

The fogs will probably be pretty easy to change with the bumper off. I was looking at taking the front wheels off, removing the wheel well lining off and going in that way. Mine look all burnt or something... its odd.

 

Weird. It's only $97 for the full set from RB. Not sure how much shipping is but it's not that much. Fluid might be able to get them as well since he sells other RB parts.

https://www.racingbeat.com/resultset...tnumber=screen set

And it's only 1 radiator screen. The other two are your oil cooler screens. Glad you're getting them as I almost pulled the trigger on this the other week. Now I'll get to see 'em before I buy 'em. I think Ted got them as well. At least for the oil coolers.

 

db,
did you get your email?

 

Right...oil coolers are radiators though and I was feeling lazy. :P They are new supposedly. I just need to get one for the front grill behind the license plate.

 

Not at home to get an email.

 

Anyone interested in a set of Stance gr+ coilovers? $1049 shipped if someone else orders a set with me :D

 

Oh, and another thanks to doc for letting me scoot around yesterday in your 8!

 

Talked to Brice...he sells no screens.

Btw...this is what Im looking to do...

 

Paint your car white? No fair, I like being the only WWP 8 in the area.

 

Apologies in advance if I've missed the post (being a noob and all) but are there recommendations for shops that do good alignment work in the Cleveland area?

 

Welcome. And there's no good reason to jump out of a perfectly good airplane!!

Enger Tire sponsors the NORA racing group in the area and has good technicians that will know how to do a sport alignement.

Where are you at? Ever jump out in Garrettsville?

 

Best place to go is white wheels on lorain rd just north of 71 and 150th. Little pricey but great work. There's also a place in tallmadge called the alinement shop. Enger is fine if you just want a stock alignment but without the nora discount they aren't gonna be a lot cheaper than a custom alignment shop.

 

Thanks. I was planning the following set-up for my alignment:
Front camber -1.4 (L/R)
Front caster ~6.5
Front toe zero
Rear camber -1.9 (L/R)
Rear toe 0.08 (L/R)
Thrust 0

I was planning to put Tanabe GF's on as well as the progress Tech sways beforehand. I am hoping that the 14%/27% (F/R) spring rate increase and the adjustable sways will let me bring the car to neutral/oversteer than stock.

As far as perfectly good airplanes - I've seen the maintenance records! I'll keep my chute. My base is Selfridge up in Michigan, although I'm over on the east side here.

 

Uhh...no...UCK! Although...there is a WWP on 19's up here for sale if you are interested in another.

 

There's a case of Royal Purple 10W30 for sale on the NORA Forum if anyone wants it. $100. http://www.noraracing.net/forum/view...p=27213#p27213

 

Are you putting the car on the track or autocrossing or just getting a good street alignment? If it's the latter then your alignment is good tho I'd reduce the rear camber to match the front to help reduce understeer and maybe bump them both to -1.6 though that's right around where people see additional wear. People keep the rear higher then the front to maintain the factory alignment bias. Unless you go to a good shop it might be tough to get over -1 in the front.

If your tracking it you may want to go all the way to -2 camber all round.