~~NKY/CINCY Club Lounge~~
#2404
Just threw on a set of evo wheels on the rx8, 17x8 +38 with 245/45/17 falken azenus rt615's hooray for some new backroad wheels!
MB battles this spring, so that sets me up with 3 sets of wheels... overkill?
MB battles this spring, so that sets me up with 3 sets of wheels... overkill?
#2405
Registered
iTrader: (3)
it might depending on tires, but in my case, I have +38 evo wheels with 245 tires, and they rub a little. (the plastic tab...)
mine is 18x8.5, with 245/40/18. but in theory, rim width/diameter should not matter... i think...
anyways, I have 3 sets, winter, summer and autox, and the one with +38 is for autox, so rubbing doesn't really matter to me..
mine is 18x8.5, with 245/40/18. but in theory, rim width/diameter should not matter... i think...
anyways, I have 3 sets, winter, summer and autox, and the one with +38 is for autox, so rubbing doesn't really matter to me..
#2406
Out there...
iTrader: (1)
Join Date: Dec 2009
Location: N KY
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
While I haven't done a heads-up against the wife, I believe it's already quicker than an 8 (she does too as she wouldn't try to keep up with me one time). With another 50 hp or so life should be interesting!
#2407
Ohio State
iTrader: (1)
Join Date: Jun 2005
Location: Back in Cincinnati, Ohio
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Changed the oil, tranny and diff fluid at 6am this morning! Put Motul 300 in the tranny and Motul 300 LS (for the LSD) in the diff. Used 5w30 Pennzoil non-synthetic for the oil.
Going back later this afternoon after the Buckeyes game to balance the tires and get a wash.
What a difference the Motul makes in the tranny and diff! I highly recommend it!
Going back later this afternoon after the Buckeyes game to balance the tires and get a wash.
What a difference the Motul makes in the tranny and diff! I highly recommend it!
#2408
Registered
iTrader: (2)
Join Date: May 2010
Location: Cincinnati/Columbus
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Okay yesterday I was out driving and had the a/c on max since it was hot as hell (98 degrees and humid). My car died as depressed the clutch to come to a stop. Restarted the car a few time and it wouldn't hold idle. I turned off the a/c and opened the windows and after a bit everything went back to "normal."
I think I'm having an issue with the amount of "power" my battery is putting out, as in I don't think it's supplying enough power to run all the cars systems. Which may be the cause for not being able to run cruise control when my headlights are on.
I don't know if any of what I'm thinking is valid, any thoughts?
I think I'm having an issue with the amount of "power" my battery is putting out, as in I don't think it's supplying enough power to run all the cars systems. Which may be the cause for not being able to run cruise control when my headlights are on.
I don't know if any of what I'm thinking is valid, any thoughts?
#2410
Simple voltmeter could help figure that one out.
I'd love to have enough money to properly turbo/supercharge this car and get enough low-end torque to make up for the abysmal low-end we have. That, and getting another 70bhp would make this car an absolute dream, IMO. Already handles like one, just getting it up into the 300hp range would put it FAR beyond anything at its price point.
And I think I'm still the only one of us up here with an S2.
Oh yeah, and I grabbed some red duplicolor caliper paint. Gonna try to do my calipers and my quad's hubs red tomorrow. We'll see how it goes.
I'd love to have enough money to properly turbo/supercharge this car and get enough low-end torque to make up for the abysmal low-end we have. That, and getting another 70bhp would make this car an absolute dream, IMO. Already handles like one, just getting it up into the 300hp range would put it FAR beyond anything at its price point.
And I think I'm still the only one of us up here with an S2.
Oh yeah, and I grabbed some red duplicolor caliper paint. Gonna try to do my calipers and my quad's hubs red tomorrow. We'll see how it goes.
#2414
Out there...
iTrader: (1)
Join Date: Dec 2009
Location: N KY
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Those are some pretty wheels!
Anyone got an extra set of 8 injectors lying around they want to sell me when I get home? It's looking like those will be the perfect size for the amount of boost I'll be running on the Miata. Somehow I think the wife would miss hers.
Anyone got an extra set of 8 injectors lying around they want to sell me when I get home? It's looking like those will be the perfect size for the amount of boost I'll be running on the Miata. Somehow I think the wife would miss hers.
#2415
9K Buzz in my head
Join Date: Apr 2011
Location: Ohio
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Hope the paint works out. I'd be interested to see how it compares to the G2 paint. Now I wish I went with red instead of black G2. I hear red adds 30+ ft-lbs of torque.
I'd like to do something with my grill. Not a lot of parts out there for S2s. Also, I'm thinking of blacking out the small chrome bits below the fog lights. The S1s do have a much better looking from end. I guess I could rip it all off and redo it.
#2416
Nope, you're not the only S2. You just happen to have tighter fitting seats.
Hope the paint works out. I'd be interested to see how it compares to the G2 paint. Now I wish I went with red instead of black G2. I hear red adds 30+ ft-lbs of torque.
I'd like to do something with my grill. Not a lot of parts out there for S2s. Also, I'm thinking of blacking out the small chrome bits below the fog lights. The S1s do have a much better looking from end. I guess I could rip it all off and redo it.
Hope the paint works out. I'd be interested to see how it compares to the G2 paint. Now I wish I went with red instead of black G2. I hear red adds 30+ ft-lbs of torque.
I'd like to do something with my grill. Not a lot of parts out there for S2s. Also, I'm thinking of blacking out the small chrome bits below the fog lights. The S1s do have a much better looking from end. I guess I could rip it all off and redo it.
Paint is drying right now. 4 coats takes forever. Gonna give it about an hour before I put the wheels on. Some WIP shots:
Front:
Rear:
#2417
9K Buzz in my head
Join Date: Apr 2011
Location: Ohio
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
I used one coat with the G2 paint. I was skeptical it would coat in one but it did. It almost fuses to the calipers when you apply it. I think I did all four in about an hour, including the prep, once I pulled the wheels. I did some taping as you did, but once around the backside, I didn't spend as much time hitting every spot that carefully.
Red will look good with your car, especially with the R3 wheels.
While you have the wheels off, can you pull your Bilsteins for me? LOL
Red will look good with your car, especially with the R3 wheels.
While you have the wheels off, can you pull your Bilsteins for me? LOL
#2418
9K Buzz in my head
Join Date: Apr 2011
Location: Ohio
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
That opens up the front end a lot. I was right about removing the chrome bits by the fogs. I was thinking of putting some black tape on them just to see how it would look and then paint it if it turned out. I'm not sure how they mount on, but if they used two-sided tape instead of fasteners, then it would be easy to remove. I'd hate to have to remove the entire front piece just to get to a couple fasteners.
The fogs are pretty useless anyway. Taking them off really looks good.
The fogs are pretty useless anyway. Taking them off really looks good.
#2420
That opens up the front end a lot. I was right about removing the chrome bits by the fogs. I was thinking of putting some black tape on them just to see how it would look and then paint it if it turned out. I'm not sure how they mount on, but if they used two-sided tape instead of fasteners, then it would be easy to remove. I'd hate to have to remove the entire front piece just to get to a couple fasteners.
The fogs are pretty useless anyway. Taking them off really looks good.
The fogs are pretty useless anyway. Taking them off really looks good.
I've actually thought about painting the chrome part in the headlight a gloss black color. Saw someone do it in a thread to their S2 lights and it looked pretty good.
#2422
And how do you all feel about tint on black cars?... How dark is too dark?
#2423
Ohio State
iTrader: (1)
Join Date: Jun 2005
Location: Back in Cincinnati, Ohio
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
I would do 20%. I use to have an 05 Black RX8, trust me..tint on a black 8 makes the car look 10x better..in my opinion. I would do it in a heart beat. You will not be disappointed at all.
I can give you a number of a guy that I always use to tint my cars. Just let me know.
Its about 105 here today. Suppose to cool down to 99 this weekend.
I can give you a number of a guy that I always use to tint my cars. Just let me know.
Its about 105 here today. Suppose to cool down to 99 this weekend.
#2425
9K Buzz in my head
Join Date: Apr 2011
Location: Ohio
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
As for the chrome bits on your car Atredeus, I agree on a all black car you need something to add some contrast. With my silver, I need more black. I have winter wheels I picked up from a friend and they're dark gray/black. Might break up some of the silver on my car.