WTB New MAF
#5
Original Turbo 'd Auto !!
Thread Starter
Originally Posted by two rotors
It is the same MAF sensor as some Protege models.You should be able to buy new for about $75.
It also looks close to some of the '02 Wrx Maf.
I would say it's broken because when the engine was swapped the numb nuts the swapped it (read stealership) stripped the screw holes out of the intake and the plastic "shield" around the bulb was missing and the bulb and wire are bent.
So yes I think its broken.
#7
Originally Posted by 09Factor
Paul?
Have any?
Have any?
Paul 1 800 221 5156.
#8
Registered User
What would be a suggestion if the screw holes are almost stripped out on the plastic tube for the MAF? I have taken it out a couple times to clean it, and that plastic is not very strong and I think the screws have about stripped it out. Would you just use loctite on the screws? Any suggestions.
#9
Originally Posted by Brice-RX8
What would be a suggestion if the screw holes are almost stripped out on the plastic tube for the MAF? I have taken it out a couple times to clean it, and that plastic is not very strong and I think the screws have about stripped it out. Would you just use loctite on the screws? Any suggestions.
Paul.
#11
Originally Posted by Brice-RX8
Yes the tube the MAF screws into, any suggestions? Just use some loctite?
Paul.
#14
more then a Mazda
Join Date: Jan 2005
Location: VIRGINIA
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
i had this problem when i was making mods to the intake and found out the maf was loose
so i got two slightly larger screws and rethreaded the holes blew out the excess plastic dirt
reinstalled the maf with no more problems...also some time in the future i believe that if someone of the great brains would come up with a maf that would change the air flow measures to let the fuel rate be tuned for better mpg..(don't flame me)
so i got two slightly larger screws and rethreaded the holes blew out the excess plastic dirt
reinstalled the maf with no more problems...also some time in the future i believe that if someone of the great brains would come up with a maf that would change the air flow measures to let the fuel rate be tuned for better mpg..(don't flame me)
#17
Original Turbo 'd Auto !!
Thread Starter
Well I finially got the new MAF. Paid for 3day but UPS turned that into a week. Got it yesterday.
Very nice clean MAF Paul.
Thanks
and it did clear up my knocking issues..
Very nice clean MAF Paul.
Thanks
and it did clear up my knocking issues..
#18
Originally Posted by 09Factor
Well I finially got the new MAF. Paid for 3day but UPS turned that into a week. Got it yesterday.
Very nice clean MAF Paul.
Thanks
and it did clear up my knocking issues..
Very nice clean MAF Paul.
Thanks
and it did clear up my knocking issues..
Paul 1 800 221 5156.
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
Evan Gray
Series I Trouble Shooting
0
09-26-2015 12:30 PM