WTB New MAF
What is the cost for a "new" Maf. Well least one that isn't broken like mine.
|
Is a difference between broken and dirty. It can be cleaned but if you touch the maf wires in the process it's toast.
|
It is the same MAF sensor as some Protege models.You should be able to buy new for about $75.
|
how do you know if your MAF is broken?
|
Originally Posted by two rotors
It is the same MAF sensor as some Protege models.You should be able to buy new for about $75.
It also looks close to some of the '02 Wrx Maf. I would say it's broken because when the engine was swapped the numb nuts the swapped it (read stealership) :mad: stripped the screw holes out of the intake and the plastic "shield" around the bulb was missing and the bulb and wire are bent. So yes I think its broken. |
Paul?
Have any? |
Originally Posted by 09Factor
Paul?
Have any? Paul 1 800 221 5156. |
What would be a suggestion if the screw holes are almost stripped out on the plastic tube for the MAF? I have taken it out a couple times to clean it, and that plastic is not very strong and I think the screws have about stripped it out. Would you just use loctite on the screws? Any suggestions.
|
Originally Posted by Brice-RX8
What would be a suggestion if the screw holes are almost stripped out on the plastic tube for the MAF? I have taken it out a couple times to clean it, and that plastic is not very strong and I think the screws have about stripped it out. Would you just use loctite on the screws? Any suggestions.
Paul. |
Yes the tube the MAF screws into, any suggestions? Just use some loctite?
|
Originally Posted by Brice-RX8
Yes the tube the MAF screws into, any suggestions? Just use some loctite?
Paul. |
Ok, thanks.
|
:ylsuper: QUICK FIX!!use a larger screw with fine threads half inch long.if you use self tapping and be sure you blow out the excess plastic shavings...works like new!!
|
i had this problem when i was making mods to the intake and found out the maf was loose
so i got two slightly larger screws and rethreaded the holes blew out the excess plastic dirt reinstalled the maf with no more problems...also some time in the future i believe that if someone of the great brains would come up with a maf that would change the air flow measures to let the fuel rate be tuned for better mpg..(don't flame me) |
Thanks again guys, thought about that but didn't know if it would mess something up.
|
Best of luck with that fix.
Paul. |
Well I finially got the new MAF. Paid for 3day but UPS turned that into a week. Got it yesterday.
Very nice clean MAF Paul. Thanks and it did clear up my knocking issues.. |
Originally Posted by 09Factor
Well I finially got the new MAF. Paid for 3day but UPS turned that into a week. Got it yesterday.
Very nice clean MAF Paul. Thanks and it did clear up my knocking issues.. Paul 1 800 221 5156. |
All times are GMT -5. The time now is 10:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands