Titaniumtt

iTrader: (1)

Category: Drivetrain
Price: $123
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I
Location (US State/Canada/Int): CT
Item Condition: Used

About a year ago I had a catastrophic oil system failure in my beloved 2004 BB GT. It took a few months to collect the time & parts for me to build a great engine & get the car back on the rd. I broke the engine in all nicey nice by running for an hour & changing the oil. Changing the oil again @ 500 miles. Changing @ 1500 miles, @ again 2500. Also of note, Sohn adapter plus .75oz/gallon premix in the tank All told I put 3000 miles total on the engine before hitting a patch of black ice and totaling the car out. The damage isn't that bad at all, but the INS co considered it a total loss. So, time to build a track car!

There are a lot of parts that I don't need that I'm selling.
The vehicle is in CT, I live in VT.
Delivery in the NE can be arranged as shipping some items won't be very fun. I do have a steel "pallet" for the engine although I will be requiring it back if used for shipping. I have other actual pallets for the engine.
By the end of Feb I expect to have the vehicle stripped & all parts waiting for sale to be in the shop ready to go
If someone is in desperate need of a part that I have listed, I can remove & ship almost immediately.
Pics available upon request, I'll be back in CT at the end of the week & can snap a few pics then.

The main parts that I no longer need are listed

Engine - $2500 or $3000 with harness & IGN-1 coils & wires

Freshly built MSP engine with Quicksilver/AEM/Haltech IGN-1 coils, wires, custom mount & engine harness. Not a plug & play adapter, the harness was properly modified. Previous engine spun bearings & damaged rotors & flat housings. Spec'ed "Matched" rotors - weight codes the same, all dimensions of rotors checked. Resurfaced irons. Resurfaced housings. New Mazda Apex seals & springs. New corner seals & springs. New side seals, scrapers & springs. Used oil control rings NOT from the previous engine. New Oil control o-rings & springs. New competition main & rotor bearings. Used, from a different engine & well within spec e-shaft. New oil pan. Sohn OMP Adapter
Engine will be complete minus throttle body, exhaust manifold, clutch & flywheel. Exhaust available separately although we can definitely talk about a package deal. Compression test available. Installation available as well. The last MSP I built made 207 rwhp on a DynoJet & this one feels STRONGER!

Intake - Racing Beat Rev-i & duct combo, new filter excellent shape $250 plus shipping

Exhaust - This is a custom full stainless steel 3" unit from the ports to the bumper & makes the most sense to sell as one.
Racing Beat Manifold with a stainless steel v-band welded on the outlet. NO MORE GASKETS.... EVAR!!!!! Vibrant Pre-silencer in place of the cat, only one as opposed to the two on the Racing Beat Ren V2 Race pipe, yet a little quieter than zero on the Rev1 Race Pipe. I placed the rear O2 sensor in a place where the check engine light does not come on. 3" straight thru a flex coupler to a custom splitter. 3" in & 2*2.5" out to Magnaflow mufflers. 2.5" in/out. Same design as the Racing Beat Rev8 exhaust. In comparison from the RB website
Header - $540
Race-Pipe - $285
Cat-Back - $770
Racing Beat system would cost $1595 plus applicable tax. My entire system for $1000. If you're looking for the most gains for the least dollars in the exhaust category, this is the piece for you

Interior - I plan on keeping the stock dash, front door cards, headliner & the carpet. Everything else is going. This is a GT & has the black leather interior. Also, all airbags are for sale as well

Koyo AL Rad - $150 - "Sold"

The ONLY three parts that I need that I would be interested in trading is
1) a Passenger side headlight
2) a knockoff MS Front bumper cover
3) Adjustable rear wing

bluetii

iTrader: (3)

I m interested in the radiator.

bluetii

iTrader: (3)

you need an s1 passenger side headlight? I might have still.

Titaniumtt

iTrader: (1)

Rad is spoken for, sorry
Will update thread if I can

Is this the same BlueTii from RX7Club?

TeamRX8

iTrader: (25)

no, its not

Titaniumtt

iTrader: (1)

Engine, harness, coils, wires, Rad & exhaust all sold!

REVi Intake with duct & a complete black leather interior are still for sale!

Titaniumtt

iTrader: (1)

REVi intake sold pending PU next weekend.

Full Black Leather Interior available. Surprised I haven't gotten any interest in this. A few years ago you guys would shank each other for some leather interior...... then again 10-15 years ago S1 6-spds were selling for $1000 a piece & 5 years ago I bought five for $1000 delivered!

jsanderbeck

Hi,Is the SOHN adapter for sale?Thanks Jim

jsanderbeck

Is the duo canister for sale???

Cyrix

Are you selling the side markers?

renesis friend

Is that sohn kit still for sale and do you have pics?

Ethan Valenty

Was that intake ever picked up? If not I'll buy it. I'll pay shipping to MN.

RexRx8

Know said dash isn’t for sale but mentioned the airbags for sale. By chance are you selling the passenger side cover?

Grimdemeanor

Is the mid pipe for sale still and can you ship it?
nvm I saw the whole exhaust was sold.

Alexztt

I'd be interested in the rear seat. Would you be willing to sell just those?

jl1rx7

iTrader: (2)

I have some pocket lint and string what would that give me in trade?

Schartz

iTrader: (6)

Do you by chance have carpet from this car you'd sell? NOT the floor mats, but carpet.

Cyprusfang

Do you still have the sohn adapter