DFW Autocross for month of June
#1
Rally Car Racer
Thread Starter
DFW Autocross for month of June
Equipe Rapide - http://www.autocross.com/er/
June 17, 2007 Challenge Cup #4 - Pennington Field
Registration 8:00-9:00
Entry fee is $20 for members and $25 for non-members. Most events you will get 4 timed runs with the option to enter in the Rapide PAX event for $10 which gives you two more runs.
Lone Star Chapter BMW CCA - http://www.lscbmwcca.org/autocross-schedule.html
June 09, 2007 Mineral Wells
Registration for 2007 events will be 100% online.
All participant vehicles must pass Tech Inspection on site.
Tech Inspection begins at 8am and will close at 9am.
Texas Region SCCA - http://www.autocross.com/texasregion/
June 10, 2007 Mineral Wells Airpark
Registration & Tech 7:30AM-8:30AM
Did I miss any?
June 17, 2007 Challenge Cup #4 - Pennington Field
Registration 8:00-9:00
Entry fee is $20 for members and $25 for non-members. Most events you will get 4 timed runs with the option to enter in the Rapide PAX event for $10 which gives you two more runs.
Lone Star Chapter BMW CCA - http://www.lscbmwcca.org/autocross-schedule.html
June 09, 2007 Mineral Wells
Registration for 2007 events will be 100% online.
All participant vehicles must pass Tech Inspection on site.
Tech Inspection begins at 8am and will close at 9am.
Texas Region SCCA - http://www.autocross.com/texasregion/
June 10, 2007 Mineral Wells Airpark
Registration & Tech 7:30AM-8:30AM
Did I miss any?
#4
Rally Car Racer
Thread Starter
#5
Club Marbles Member
Join Date: Jul 2005
Location: DFW, TX
Posts: 3,252
Likes: 0
Received 0 Likes
on
0 Posts
Equpe Rapide - we can just walk in, register and have some runs? How many drivers usually show up to one of these? How long does the event usually last?
Not sure if I'm completely free that Sunday, but Bedford is only half an hour away from my place taking 360 and I'd like to have a go maybe. My tires are probably past their legal tread limit though....
Not sure if I'm completely free that Sunday, but Bedford is only half an hour away from my place taking 360 and I'd like to have a go maybe. My tires are probably past their legal tread limit though....
#6
1935 lbs. FTW!
I went to the BMW event this past weekend it was a blast, road course style with speeds 100+ on the straight. I might try and make it to ER if I can wake up in time.
#7
Rally Car Racer
Thread Starter
Equpe Rapide - we can just walk in, register and have some runs? How many drivers usually show up to one of these? How long does the event usually last?
Not sure if I'm completely free that Sunday, but Bedford is only half an hour away from my place taking 360 and I'd like to have a go maybe. My tires are probably past their legal tread limit though....
Not sure if I'm completely free that Sunday, but Bedford is only half an hour away from my place taking 360 and I'd like to have a go maybe. My tires are probably past their legal tread limit though....
It usually lasts until about 2 or 3 in the afternoon.
There is no legal tread limit that I know of. Some people run "treadless" tires such as the Kumho V710. The only requirements are that the tires must have adequate rubber with no cords (belting) exposed.
#8
Rally Car Racer
Thread Starter
#9
1935 lbs. FTW!
#10
Rally Car Racer
Thread Starter
#11
Cone Killer
Join Date: Feb 2007
Location: Dallas, TX
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
I was at the LSCBMWCCA event running a Miata but you guys missed a fun one! Like Cosmos said, it was a super fast course. I did run a few fun runs in my stock RX-8 after the competitive runs were done. Good times!
And yes, Cosmos's car is well setup and very fast.
And yes, Cosmos's car is well setup and very fast.
#12
Club Marbles Member
Join Date: Jul 2005
Location: DFW, TX
Posts: 3,252
Likes: 0
Received 0 Likes
on
0 Posts
I'm really considering going with a friend of mine, he has an mr2. Do we have to bring our own sticker numbers or whatever, or are they provided?
I'm a total n00b...
I'm a total n00b...
#14
1935 lbs. FTW!
Or go to Michaels/Hobby shop and buy a roll of vinyl magnetic material and then you can use wordart to stencil and cut out numbers. I made 2 pairs for about 20 bucks. You can also paint them to whatever color you like or leave them white.
#15
Sparky!
iTrader: (3)
Join Date: Sep 2004
Location: East Jesus (Murphy, TX)
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
Anyway, I'm at all of the local Equipe Rapide and SCCA events, and try to make it out to the occasional BMW, PCA, or S2000 event as well. I'm located in Murphy (east of Plano), so if any of the NE area peeps are ever interested in following someone out to an event, drop me a PM.
Thread
Thread Starter
Forum
Replies
Last Post
hufflepuff
Series I Wheels, Tires, Brakes & Suspension
6
05-30-2016 10:45 AM
{WTB/WTT} WTB Right Undertray Riser and Guard
archon
RX-8 Parts For Sale/Wanted
3
10-01-2015 06:08 AM
Racingjunkie
Series I Wheels, Tires, Brakes & Suspension
2
09-29-2015 05:05 PM