Anyone experienced in houston, SA, or austin with shocks/springs change?
#1
Anyone experienced in houston, SA, or austin with shocks/springs change?
I'm not trying to get out of paying and get you guys to work on my car for free, so I'm still up for paying a bit for your help and use of your tools...I just want to participate in changing the shocks and springs so I can be more hands on with my car and learn myself...I installed my AEM CAI but the instructions were so noob friendly it wasn't that bad. I'd love if anyone in the area could help me out :D pm me or text 832-231-ohtwo01.
thanks =)
if it matters shocks are tokico dspecs and tein s tech springs.
thanks =)
if it matters shocks are tokico dspecs and tein s tech springs.
Last edited by phrenetiK; 08-26-2010 at 04:14 PM.
#3
The RX-8 is missed
iTrader: (3)
Join Date: Aug 2005
Location: Houston, TX
Posts: 2,084
Likes: 0
Received 0 Likes
on
0 Posts
good luck! i'm sure someone will chime in and help. if not, the guys in the sa crew are super nice and would probably help if you drove there. i did mine, with the help of my brother-in-law who is very good at that stuff, so i definitely understand where you're coming from. i'm not experienced enough to be able to do it with you, otherwise i would offer.
#7
SARX Legend
iTrader: (46)
Canary is closer and the shop he speaks of is a good place to go (remember the coilover install Canary?). But if you come to SA we can probably knock it out. I have a guy coming from Del Rio this weekend that I am going to help install coilovers on his 8.
#8
heck yeah, we did an IS-F a few months ago as well, it had an aftermarket exhaust, omg it was rad, dude has really nice wheels now too. I need to find it on the forums again, that car is super sick.
#11
#13
Registered
iTrader: (7)
Hey, I also have springs/shocks I would like to install but do not have any idea how/what to do.
I can meet/drive with you to Houston, Dallas, SA, or Austin
I already have the springs and shocks but in no rush to install them
I might have to roll the fenders since I have big 19 wheels/tires.
Also I might not be much help in installing but would like to learn.
Thanks
Oh do not work so can do anytime.
same zip as urs 452 two oh 5 oh
I can meet/drive with you to Houston, Dallas, SA, or Austin
I already have the springs and shocks but in no rush to install them
I might have to roll the fenders since I have big 19 wheels/tires.
Also I might not be much help in installing but would like to learn.
Thanks
Oh do not work so can do anytime.
same zip as urs 452 two oh 5 oh
Last edited by Myardor; 08-28-2010 at 11:55 AM.
#15
Pew Pew Pew
iTrader: (10)
Hey, I also have springs/shocks I would like to install but do not have any idea how/what to do.
I can meet/drive with you to Houston, Dallas, SA, or Austin
I already have the springs and shocks but in no rush to install them
I might have to roll the fenders since I have big 19 wheels/tires.
Also I might not be much help in installing but would like to learn.
Thanks
Oh do not work so can do anytime.
same zip as urs 452 two oh 5 oh
I can meet/drive with you to Houston, Dallas, SA, or Austin
I already have the springs and shocks but in no rush to install them
I might have to roll the fenders since I have big 19 wheels/tires.
Also I might not be much help in installing but would like to learn.
Thanks
Oh do not work so can do anytime.
same zip as urs 452 two oh 5 oh
If you still have the tires on the rear that you had last time, then I will say again that you do not need to lower your car. Those tires are WAY too tall.
#16
Registered
iTrader: (7)
Yes, still have those tires
Been working on my bike, does not want to idle properly
Someone tried to do a spring install last year. Do not remember who but they found out the nuts/bolts were on too tight and they did not have the impact wrench to take them off
Found out my bro in law has a roll tool in SA so I might be able to borrow that.
After the bike, I will try to install my rotors/brake pads/paint underside/paint calipers/etc
Been working on my bike, does not want to idle properly
Someone tried to do a spring install last year. Do not remember who but they found out the nuts/bolts were on too tight and they did not have the impact wrench to take them off
Found out my bro in law has a roll tool in SA so I might be able to borrow that.
After the bike, I will try to install my rotors/brake pads/paint underside/paint calipers/etc
#23