RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Group Buy Center (https://www.rx8club.com/group-buy-center-85/)
-   -   GB: One Touch Close Sunroof Module (https://www.rx8club.com/group-buy-center-85/gb-one-touch-close-sunroof-module-141615/)

TheWulf 04-18-2008 07:30 PM

Got mine in and everything works! I love this mod.

One minor issue though: If you manually stop your sunroof in a position that is not fully opened or closed (ex half way) the buttons stop responding for about 30 seconds. Is this normal?

The reason I noticed this is that I something like my sunroof in the "big tilt" position (tilted farther open than the regular tilt by hitting slide then stopping it once its all the way up but hasn't started to move back though.

I can live with it but I just wanted to make sure it's an expected side effect.

edit: Close button seems to sometimes not work when the sunroof is open? If I re-hit open then close it works though. Most of the time it works fine but randomly it won't do anything.

Worth noting is that I had to pull off the wire tap and put it back on as it missed the orange wire the first time :-/ Since that means an extra gash in the red wire because of it, would that make the connection less stable?

Rotary Rasp 04-18-2008 11:44 PM


Originally Posted by TheWulf (Post 2415195)
Got mine in and everything works! I love this mod.

One minor issue though: If you manually stop your sunroof in a position that is not fully opened or closed (ex half way) the buttons stop responding for about 30 seconds. Is this normal?

Here's the deal with that. You need to wait about 4 seconds before pressing the button again. Every time you press it before that, it resets and adds another 4 seconds. Thats why it feels like 30 seconds. If you want to move it after stopping it half way, count to 4 first. The buttons should work fine after that.


Originally Posted by TheWulf (Post 2415195)
edit: Close button seems to sometimes not work when the sunroof is open? If I re-hit open then close it works though. Most of the time it works fine but randomly it won't do anything.

Was the engine running while you had this problem?

raizen82 04-19-2008 12:11 AM

got my replacement and installed. works like a charm now. issues mentioned by TheWulf i think are normal as rodger has explained, the delay that is.

thanks RR!

Razz1 04-19-2008 12:30 AM

Sounds like someone is going to get confused and cut thre hand off!

Rotary Rasp 04-19-2008 10:45 AM


Originally Posted by Razz1 (Post 2415604)
Sounds like someone is going to get confused and cut thre hand off!

you're really not helping.

raizen82 04-19-2008 11:31 AM


Originally Posted by Rotary Rasp (Post 2415948)
you're really not helping.

i lol'ed :lol:

laythor 04-19-2008 02:44 PM

people who are too stupid to figure out how to work a simple mod deserve to go around one handed.

TheWulf 04-20-2008 07:56 PM

Ok so yesterday I was going to try out that 4 second thing and something else decided to happen :-/

Opened the sunroof, drove like 10 mins, hit the close and it didn't auto-close (just the normal few inches). Hit it again, same thing. Hit it a third time and none of the controls worked anymore :-/

Happens I blew the 7.5A fuse that this is hooked up to. I took the mod out for now to make sure it didn't blow again, and I wanted to check with you as to possible cause. Should I put it back in? Should I upgrade that fuse?

Sidenote: anyone else find it odd that the same fuse is used for sunroof controls, seatwarmers and HVAC but the maplights are on a diff fuse?

Rotary Rasp 04-21-2008 10:56 PM


Originally Posted by TheWulf (Post 2417749)
Ok so yesterday I was going to try out that 4 second thing and something else decided to happen :-/

Opened the sunroof, drove like 10 mins, hit the close and it didn't auto-close (just the normal few inches). Hit it again, same thing. Hit it a third time and none of the controls worked anymore :-/

Happens I blew the 7.5A fuse that this is hooked up to. I took the mod out for now to make sure it didn't blow again, and I wanted to check with you as to possible cause. Should I put it back in? Should I upgrade that fuse?

Sidenote: anyone else find it odd that the same fuse is used for sunroof controls, seatwarmers and HVAC but the maplights are on a diff fuse?

PM Sent

Blacknoir 04-22-2008 10:56 AM

I just sent the waiver via email. Once you verify you received it I'll send the paypal.

Rotary Rasp 04-22-2008 11:35 AM


Originally Posted by Blacknoir (Post 2420835)
I just sent the waiver via email. Once you verify you received it I'll send the paypal.

I got your waiver so send the money whenever.

Jedi54 04-22-2008 11:39 AM

had this thing in for like a week but only driven my car twice this month. I almost forgot it was in there till I went to close the sunroof this morning.

LOVE this thing! So much in fact that I thought it needed its own thread for those of us who have already installed it. https://www.rx8club.com/series-i-interior-audio-electronics-24/rotaryrasps-sunroof-switch-mod-installed-143974/

HiTMaNN 04-22-2008 02:24 PM

FYI Rodger Canadian customs finally cleared the package and it is now in my hands. I blame the Osama Bin Laden stamp you used :P

Rotary Rasp 04-22-2008 06:42 PM


Originally Posted by HiTMaNN (Post 2421393)
FYI Rodger Canadian customs finally cleared the package and it is now in my hands. I blame the Osama Bin Laden stamp you used :P


lol, I got a good deal on those stamps!

ProfDean 05-03-2008 09:03 AM

Too late??
 
I hope that I am not too late to buy one of these modules. Looks like an easy DIY and the convenience is worth the price. I have signed the waiver and am ready to email it to you with my Paypal payment if you are still open for business.

BoosTED 05-03-2008 10:31 AM


Originally Posted by Rotary Rasp (Post 2421985)
lol, I got a good deal on those stamps!

Osama stamp
If you draw a target over his face or something to deform his complexion I think it will get through customs faster. ;)

The reason they gave them so cheap was they were not completed yet.

:rofl:

Jedi54 05-03-2008 02:51 PM


Originally Posted by ProfDean (Post 2442027)
I hope that I am not too late to buy one of these modules. Looks like an easy DIY and the convenience is worth the price. I have signed the waiver and am ready to email it to you with my Paypal payment if you are still open for business.

i think the GB is still ongoing. hopefully Rasp will chime in soon.

Rotary Rasp 05-03-2008 06:15 PM

yes it is. i'm going to make some more modules today.

ProfDean 05-03-2008 08:33 PM

OK, let me know when you are ready and I will send you the waiver and Paypal payment.

SebtownRx8 05-05-2008 01:15 AM

Same, i'd buy one when you have them ready.

Rotary Rasp 05-06-2008 12:05 AM

I have more units that are ready to ship. I'm going to the post office tomorrow. So send the waiver and payment tonight.

Rotary Rasp 05-06-2008 10:41 AM

Last chance if you want it mailed today.

Rotary Rasp 05-07-2008 11:27 AM

I'm going to be ending the group buy this weekend. Last chance to buy one.

Jedi54 05-07-2008 11:46 AM

OMG, the group buy is ending already?! You guys better jump on this quick!

laythor 05-07-2008 03:47 PM

I'm getting giddy thinking about RR's next GB.


All times are GMT -5. The time now is 06:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands