Good Guy: Jim @ JPR
#1
Good Guy: Jim @ JPR
After my local dealership wasted a bunch of my time and prolonged my driving on a badly clogged cat, Jim nailed and documented the diagnosis in an hour, which allowed me to get it covered under warranty at another dealership. I'm not happy I had to pay for indy shop time on a warranty issue -- but if my money had to go somewhere, I'm glad it went to JPR. Great guy, and I hope I can direct some more business to him in the future.
#2
///// Upscale Zoom-Zoom
What and how did Jim @ JPR do to positively diagnose a clogged cat?
#3
Before the appointment, he gave me some tips over the phone for things to pay attention to while I drove the car (I had Torque with an Bluetooth OBD dongle). Then he drove the car with an OBD scanner plugged in. He immediately noticed major power loss above 6k-7k, like the car was choked off, but nothing abnormal on the scanner. Then he just threw the car on a lift, undid those three fasteners, tilted the cat down, and saw the honeycomb in pieces. Then he documented it so I could have another dealership replace the cat under the federally mandated emissions warranty.
The diagnosis was nothing groundbreaking, really. When I described the symptoms here, some members also figured it was probably a clogged cat. What I liked about Jim at JPR was that he made everything easy, quick, and friendly, and that he obviously knew the car -- all of which was SUPER refreshing after my experience with my local dealership.
The diagnosis was nothing groundbreaking, really. When I described the symptoms here, some members also figured it was probably a clogged cat. What I liked about Jim at JPR was that he made everything easy, quick, and friendly, and that he obviously knew the car -- all of which was SUPER refreshing after my experience with my local dealership.
Last edited by IamFodi; 07-03-2017 at 06:12 AM.
The following 2 users liked this post by IamFodi:
MazdaRX8Lover (07-03-2017),
wannawankel (07-03-2017)
#4
You gonna eat that?
iTrader: (1)
What is JPR?
#6
You gonna eat that?
iTrader: (1)
Cool, I'll add them to the rebuilders thread.
The following users liked this post:
wannawankel (07-03-2017)
The following users liked this post:
gwilliams6 (07-09-2017)
#8
40th anniversary Edition
I have used Jim of JPR for many things on my RX8. He is a master rotary tech and wrench that has worked for decades on rotaries , stock, race and drag. He has built these and custom rotary cars from the ground up, including his 1000hp rotary dragster.
A small shop but great rotary wrench. He has always been able to tackle any rotary issue and requests from his stock and modified car customers. He has built about every configuration of rotary engine and car, from two to four rotor, NA and Inducted , and rebuilds them also. He has also hosted local RX8club events at his shop.
Simply one of the best !
http://www.jprimports.com/
A small shop but great rotary wrench. He has always been able to tackle any rotary issue and requests from his stock and modified car customers. He has built about every configuration of rotary engine and car, from two to four rotor, NA and Inducted , and rebuilds them also. He has also hosted local RX8club events at his shop.
Simply one of the best !
http://www.jprimports.com/
Last edited by gwilliams6; 07-10-2017 at 11:13 PM.
The following users liked this post:
IamFodi (07-11-2017)
#13
You gonna eat that?
iTrader: (1)
I recently purchased a 14 tooth starter from Schmitz Rotary in England and got ripped off.They and their carrier DPD said the tracking stated it was delivered but it was not.I got no help from either party with this and I’m out 125.00.Im not a negative person but wanted to warn any other Rotor Heads so this won’t happen to them.
#14
This is great to see and read! I have known Jim for sometime and hes been a huge asset and help to me and my FD rx7 build. He also played a part (unknowingly) in the recent purchase of my S2 Rx8. Hes very experienced and knowledgeable and I can this from knowing on a more personal level hes a honest all around good dude!
The following users liked this post:
gwilliams6 (10-29-2018)
#15
#16
After my local dealership wasted a bunch of my time and prolonged my driving on a badly clogged cat, Jim nailed and documented the diagnosis in an hour, which allowed me to get it covered under warranty at another dealership. I'm not happy I had to pay for indy shop time on a warranty issue -- but if my money had to go somewhere, I'm glad it went to JPR. Great guy, and I hope I can direct some more business to him in the future.
The following 2 users liked this post by wowo76:
gwilliams6 (01-01-2019),
jsanderbeck (09-05-2023)
#17
Registered
Good Guy
JPR is simply the best for simple or complex repairs,installs or trouble shooting.Kudos Jimbo-and Troy!
Last edited by jsanderbeck; 09-05-2023 at 06:09 PM. Reason: Idk
The following users liked this post:
jsanderbeck (08-19-2024)