RX8Club.com
Trailing Ignition Map
Trailing Ignition Map
0 2020/03/12 21:55:21
Leading Ignition Map
Leading Ignition Map
0 2020/03/12 21:55:16
closeup of the new pre-cut side seals
closeup of the new pre-cut side seals
0 2020/09/21 15:24:46
Secondary and Primary 2 Fuel Map
Secondary and Primary 2 Fuel Map
0 2020/03/12 21:55:09
A nice jig
A nice jig
0 2020/09/21 20:54:38
Really hard to see but here's a pretty good picture of the results
Really hard to see but here's a pretty good picture of the results
0 2020/09/21 20:54:43
Primary Fuel Map
Primary Fuel Map
0 2020/03/12 21:55:05
Just installed this Blitz supercharger. Got it used from Japan for $1500 but didn't have computer or some or the brackets. I setup an E-Manage piggyback and some other upgrades.
Just installed this Blitz supercharger. Got it used from Japan for $1500 but didn't have computer or some or the brackets. I setup an E-Manage piggyback and some other upgrades.
0 2020/03/12 21:49:28
0 2020/09/24 20:17:49
0 2017/12/03 20:57:44
0 2020/09/24 20:20:10
0 2017/12/03 20:57:43
Using great app that's free from Bluetooth Electronics to make the interface.
Using great app that's free from Bluetooth Electronics to make the interface.
0 2021/03/20 19:16:50
Documented the wiring this time...
Documented the wiring this time...
0 2021/03/20 19:16:52
New control box Still using the piggyback for fuel but this will control the SC, WMI, Bypass, look at WM pressure, air tank PSI, and passthrough info for oil temp and PSI and fuel PSI. It has bluetooth and an interface that will be in the car to make any adjustments and monitoring
New control box Still using the piggyback for fuel but this will control the SC, WMI, Bypass, look at WM pressure, air tank PSI, and passthrough info for oil temp and PSI and fuel PSI. It has bluetooth and an interface that will be in the car to make any adjustments and monitoring
0 2021/03/20 19:16:55
I'm going to be doing some cutting and welding on the SC manifolds so I threw together a hollow block using some spare cases I have so I can have a jig for the mods I'm planning and still keep everything lined-up
I'm going to be doing some cutting and welding on the SC manifolds so I threw together a hollow block using some spare cases I have so I can have a jig for the mods I'm planning and still keep everything lined-up
0 2021/09/12 17:33:24
the
the
0 2021/09/12 17:33:29
After that I'm planning to use a 'cutout' valve to control the bypass. It's a 2 1/2" bypass valve and should be plenty to run NA. I'll make the flanges with some aluminum plate I have and some aluminum tubing and connect one side with the blue intercooler hose and clamps. I'm open to suggestions here but I think this will work ok. I am a little concerned with the cheep cut valve I bought but I'll throw a tack weld on the bolts of the flap so they don't fall off in my intake and eat my engine.
After that I'm planning to use a 'cutout' valve to control the bypass. It's a 2 1/2" bypass valve and should be plenty to run NA. I'll make the flanges with some aluminum plate I have and some aluminum tubing and connect one side with the blue intercooler hose and clamps. I'm open to suggestions here but I think this will work ok. I am a little concerned with the cheep cut valve I bought but I'll throw a tack weld on the bolts of the flap so they don't fall off in my intake and eat my engine.
0 2021/09/12 17:33:37
Been doing a few projects welding aluminum like this rechargeable bluetooth speaker
Been doing a few projects welding aluminum like this rechargeable bluetooth speaker
0 2021/09/12 17:33:48
This stuff is pretty easy to weld compared to the cast aluminum but I've also been doing some practice welds on some old aluminum cases and water pumps I have to make sure I don't totally destroy this SC manifold.
This stuff is pretty easy to weld compared to the cast aluminum but I've also been doing some practice welds on some old aluminum cases and water pumps I have to make sure I don't totally destroy this SC manifold.
0 2021/09/12 17:33:52
Cut off this part of the manifold and seal that side and then open the other side and weld it back on.
Cut off this part of the manifold and seal that side and then open the other side and weld it back on.
0 2021/09/12 17:44:09
For the bypass I'll cut off and move the section that deals with the fuel purge solenoid and the vacuum box and open the manifolds where indicated.
For the bypass I'll cut off and move the section that deals with the fuel purge solenoid and the vacuum box and open the manifolds where indicated.
0 2021/09/12 17:44:13
Same mod as this guy made to the manifold but I won't be using this size intercooler. I'll be moving My battery to the trunk to free up some space and run the intercooler tubes up to an air-to-air in the front.
Same mod as this guy made to the manifold but I won't be using this size intercooler. I'll be moving My battery to the trunk to free up some space and run the intercooler tubes up to an air-to-air in the front.
0 2021/09/12 17:47:20
0 2022/03/30 20:12:35
0 2022/03/30 20:21:13
0 2022/09/24 23:02:01
0 2022/11/08 20:30:16
0 2022/11/08 20:31:04
0 2022/11/08 20:31:12
0 2022/11/08 20:31:15
0 2022/11/19 15:38:13
0 2022/11/22 20:57:20
0 2022/11/22 20:57:30
0 2022/11/26 21:19:56
0 2024/12/28 19:53:21
0 2024/12/28 19:53:26
0 2024/12/28 20:04:08