3 Attachment(s)
exhaust is all done.
Attachment 260314 Attachment 260315 Attachment 260316 He did such a nice job. I love how it tucks right up into the grooves of the underbody. no more fuckin scrapping everywhere on the road... On a more sad note: The car wasn't finished in time for the damn drift event this weekend. Which sucked ass.... but whatever. The event was sick either way. I got to drive my brothers car and someone elses, so i got some seat time. The problem with the car is low compression in the front housing. I'm at like 60, the rear is fine though. We think possibly due to massive carbon build up, cause my plugs were disgusting and they are relatively new. I had to baby the car for like 90 miles over 2 weeks, while not having a tune and running rich as fuck.... So we let that "de-carbonizing" solution sit in it for 48 hours. Were gunna check it all out tomorrow and hopefully proceed with the tune. And then it'll be done. |
exhaust looks sweet . Good luck with the decarb .
|
saw the pics over on ZT. looks good.
|
exhaust looks top notch, well the whole car does lol
|
Wow that system is legit...
How much did it end up costing, after all said and done? |
Originally Posted by tiltmode43
(Post 3566627)
wow that system is legit...
How much did it end up costing, after all said and done? |
not counting the muffler, he hooked it up for like 500.
|
Originally Posted by AZR
(Post 3566765)
not counting the muffler, he hooked it up for like 500.
If 3", why didn't you just go with an HKS Hi-Power + midpipe? If >3" then I understand why custom :mdrmed: |
Is that cage SCCA approved?
|
Originally Posted by iLikeEatPoo
(Post 3576650)
Is that cage SCCA approved?
|
Originally Posted by AZR
(Post 3577077)
its chromoly..... I dont believe that is up to their specs. Weight was my only concern
|
ehhh thats if he decides o get real competitive, as long as its chromoly dom tubing with floor plates its good enough
|
Originally Posted by Gr8Bullet
(Post 3545247)
NASCAR and formula 1 have made both made modifactions to there cars....
Not saying it's big but to make only 1 turn there spoiler ain't small https://a.espncdn.com/photo/2008/071...ohnson_580.jpg Nice however this is the last year nascar is using the wings then they are going with a much smaller setup because the wings actually cause the cars to flip over when spun around backwards. Lol basically the wings are not needed. a lip spoiler is all that is going to be used. |
Good Luck with the event ! ! !
|
i havent even seen this tread till now!
dude sick! who did your cage? |
Originally Posted by iLikeEatPoo
(Post 3551938)
do people really think drifting a N/A rx8 is that hard? 190whp stock compared to a s13 with what 90whp stock? lol.
|
3 Attachment(s)
Well here you go guys. Its finally done. I still have to lower the front a bit, wash it, and take some day time pictures. I fuckin love it though. It's making about 250hp at 8psi.
Attachment 259262 Attachment 259263 Attachment 259264 |
SICK!!!! vertex is awesome!
where are you from dude? |
looks good! I think if you move the risers, so its wider it'll be even cooler!
|
will be interested in how it performs as a drift car .
Mad Mike seemed to have a lot of trouble dialling his suspension in to work for drifting .... |
nice :ylsuper:
|
2 Attachment(s)
Originally Posted by Brettus
(Post 3586843)
will be interested in how it performs as a drift car .
Mad Mike seemed to have a lot of trouble dialling his suspension in to work for drifting .... Oh, and I'm from the northwest suburbs of chicago Here are a couple daytime pics we took today.... I wanna lower the front like 1/2 inch Attachment 259214 Attachment 259215 |
vids...
|
looking good...
what camber angles are you running on front and rear? what's the castor angle on the front? |
mad mike has problems with his suspension setup?
he seems to be doing just fine.... AZR... your build is rad... iv been wanting to do this for a while... just dont have the funds... how is it sideways?!?!? |
All times are GMT -5. The time now is 01:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands