View Poll Results: When are you putting your winter tires on?
mid October
12
21.05%
Nov 1
13
22.81%
mid November
19
33.33%
Dec 1
13
22.81%
Voters: 57. You may not vote on this poll
Winter tires: when are you going to put yours on?
11-04-2009, 08:01 PM
#76
Registered
iTrader: (2)
Join Date: Mar 2009
Location: Toronto, Ontario
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
I use the Meguiar one that Footman recommended...I have their high grade wax as well as their quick detailer. Tell me when you guys are meeting up for waxing the car =D I'll be on my 5th or 6th layer i think LOL
After I waxed the car the first time, it looked so much shinier and then i got so into it! went out to buy the quick detailer as well as rainX and tire and rim shine. Now I have all those things stuffed in my trunk all the time =).
Is it bad to have a lot of wax coating the car? and if i go through those self-serve washes, and use the high pressure rinse to wash the car, will a bit of the wax get washed off too?
After I waxed the car the first time, it looked so much shinier and then i got so into it! went out to buy the quick detailer as well as rainX and tire and rim shine. Now I have all those things stuffed in my trunk all the time =).
Is it bad to have a lot of wax coating the car? and if i go through those self-serve washes, and use the high pressure rinse to wash the car, will a bit of the wax get washed off too?
11-05-2009, 08:00 AM
#77
Registered
Join Date: Oct 2007
Location: Ajax, Ontario
Posts: 2,210
Likes: 0
Received 0 Likes
on
0 Posts
11-05-2009, 09:14 AM
#79
Registered
Join Date: Oct 2007
Location: Ajax, Ontario
Posts: 2,210
Likes: 0
Received 0 Likes
on
0 Posts
10-13-2010, 07:54 PM
#80
Now that the winter is slowly approaching. I was wondering if putting on my winter tires on october 19 ish would be okay. Reason is that, that's the day I'm picki,g up my brand new blizzaks and the shop is 5 minutes away. I need to have them mounted on my winter rims then put on the car. I'd like to save myself a trip. Cause I'd have to drop off the rims to the shop, go back home to grab the tires, then drop those off and do the swap. Instead I plan on bringing my rims to the shop , going to pick up my blizzaks (5 minutes away) then going back to the shop to get everything mounted and swapped.
Also will 4 oem rx8 wheels with tires on them fit in the 8. I'm worried that they might not all fit.
Also will 4 oem rx8 wheels with tires on them fit in the 8. I'm worried that they might not all fit.
10-13-2010, 11:54 PM
#81
Registered
iTrader: (2)
Join Date: Mar 2009
Location: Toronto, Ontario
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
4 OEM rx8 wheels will fit with tires on them, you throw 3 in the back seats, 1 in the trunk. Or you can throw one in the passenger seat, really up to you. It seems a bit early to be mounting winters as the temperatures are still fairly high, every now and then. Next week is still all double digits, so you might be burning a bit more rubber if you're on winters, but if you really don't have any other choice then go right ahead =] haha at least you'll be ready for a freak snow-storm, if one comes early!
10-14-2010, 12:04 AM
#82
Alright sounds good thanks !!!
I honestly cant decide i mean it will definitely save me a trip. I was thinking another option is to get the tires mounted on the winter rims and them bring those back. Then when the time comes around ill mount them at home but i dont even have a jack LOL.
I think ill just get them mounted and put on the 8 on the 19th. Either way ill be using rubber on either my summers or winters. No biggy, how much rubber can you possibly go through within like a few weeks anyway.
BTW maffu do you live in maple ?? Near majormac and keele area??
I honestly cant decide i mean it will definitely save me a trip. I was thinking another option is to get the tires mounted on the winter rims and them bring those back. Then when the time comes around ill mount them at home but i dont even have a jack LOL.
I think ill just get them mounted and put on the 8 on the 19th. Either way ill be using rubber on either my summers or winters. No biggy, how much rubber can you possibly go through within like a few weeks anyway.
BTW maffu do you live in maple ?? Near majormac and keele area??
10-14-2010, 10:34 AM
#84
it might seem like the way to do it. But I can't even afford a jack right now lol !! Ill get them put on the car when I get the tires mountted and at some point buy a jack in the winter so when spring comes around ill be able to do the swap myself. And besides I think I'm getting a free alignment too 
Thanks for the help guys
Thanks for the help guys
10-16-2010, 10:04 AM
#89
RIP Mx-3. Hello Rx-8!
Winter tires have their benefits in all conditions; dry, wet, slush, snow, mix, and ice. The soft compound helps with traction even in dry conditions because of how hard all-seaons and even worse, sport tires get. Improving acceleration, braking and cornering are always a good thing. Even better when it's wet. Also the addition siphoning groves help move water away.
Of course they'res great when it comes to snow, slush and mixed conditions. Some tires have some extra stuff mixed in them. I'm quite sure that my Geolandar I/T have volcanic sand for added ice grip.
The only ones that I would call "Snow Tires", as opposed to "Winter Tires", would be the all-seasons and off-road tires with the M+S rating. They're only good for snow because the tread helps you dig you through it, but they still use the hard all-season compound and don't have (addition) siphoning to help in the wet or ice. Many truck owners who use their M+S AT and MT tires in the winter do not like it when it's cold and wet out; they find it very slick.
I put my tires on this Thanksgiving weekend. Had no choice, I'm too far to make a quick trip to change tires but I don't drive much every day anyway, so excessive tire wear because of the warmer weather is negligible, especially since it does like to sit around 0 degrees in the morning anyway. Indeed I got a Dewalt 18v impact and a jack and I can change all 4 tires in about 20 minutes, don't even have to take out the air compressor.
FYI: Yes I am very Pro-Winter-Tires
Last edited by Nd4SpdSe; 10-16-2010 at 10:33 AM.
10-16-2010, 11:30 AM
#90
Reppin Lightning Yellow
Join Date: Mar 2008
Location: Scarlem
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
After I put on my MS rear diffuser a couple of years ago, there was unexpected snow. It was not fun driving home in it. I probably really shouldn't even have and just left it at the shop. It was less than an inch of snow and I had so much trouble just getting the damn car into my parents' driveway. My KDWs just couldn't deal with it. Winters definitely is the way to go.
The car's getting stored in a couple of weeks and the beater's coming out then.
The car's getting stored in a couple of weeks and the beater's coming out then.
10-17-2010, 11:49 AM
#91
Correct me if im wrong. But i was told to always use a manual wrench to tighten lug nuts and a powered tool to remove the lug nuts. Apparently if you use a powered tool to tighten lug ntus it can cause damage or something ? Is this true
10-17-2010, 12:12 PM
#92
RIP Mx-3. Hello Rx-8!
Absolutely. Actually, I've gotten 2 lugs on my one rear right now on the Xterra that's messed from switching to my winters this past long weekend. Well, one is from that, the other is because CT sold me what was suppose to be the right nut but wasn't so it messed the thread putting it on. So I gotta fix those this week. I managed to do a temporary fix on one, so now I'm running on 5 of 6 on that wheel until I get it fixed this week. Indeed it's probably from overtorquing it, but I also switch tires often, going between my street, off-road and winter tires. Indeed if anything, tighten them down quick with the impact and use a torque wrench to finish them off. There's also special torque limiting extension bar to help against overtorquing ($20 each or $120/set at PA), my buddies that run a wheel and tires shop use that and finish with a torque wrench.
Last edited by Nd4SpdSe; 10-17-2010 at 12:15 PM.
10-20-2010, 09:47 AM
#93
Registered
Join Date: Oct 2007
Location: Ajax, Ontario
Posts: 2,210
Likes: 0
Received 0 Likes
on
0 Posts
My 8 goes away this weekend 
Bring on the beater.
I would wait longer till it gets colder personally, blizzaks wear out fast when driven on dry/warmer pavement, but they are fantastic winter tires.
Bring on the beater.I would wait longer till it gets colder personally, blizzaks wear out fast when driven on dry/warmer pavement, but they are fantastic winter tires.
10-20-2010, 10:52 AM
#94
Extraordinary Engineering
The Jetta takes over as DD Nov 1 unless we get a warm spell.
Warning
The oil temp does not come up over 75C in normal driving, even after 30 min of 120km/h in 6C ambient. I'm not going to try it in cooler temps but it must be really bad. If your trip is under 10 min then your oil temp never gets over 60C, again related to 6C ambient
Make yourself some oil cooler covers and get yourself an oil temp gauge. For those who don't know, there is always engine oil running through the oil cooler lines. The temp bypass is part of the cooler so the oil always gets cooled to some degree.
You need 80C to 100C for ten minutes or so to burn off the condensation in the engine. Remember the milkshake on the dipstick?
Your alternative is to change your oil a lot.
You definitely need synthetic fluid in the tranny for winter. It makes a huge difference to the syncros and the notchiness goes away.
The oil temp does not come up over 75C in normal driving, even after 30 min of 120km/h in 6C ambient. I'm not going to try it in cooler temps but it must be really bad. If your trip is under 10 min then your oil temp never gets over 60C, again related to 6C ambient
Make yourself some oil cooler covers and get yourself an oil temp gauge. For those who don't know, there is always engine oil running through the oil cooler lines. The temp bypass is part of the cooler so the oil always gets cooled to some degree.
You need 80C to 100C for ten minutes or so to burn off the condensation in the engine. Remember the milkshake on the dipstick?
Your alternative is to change your oil a lot.
You definitely need synthetic fluid in the tranny for winter. It makes a huge difference to the syncros and the notchiness goes away.
Last edited by DarkBrew; 10-20-2010 at 03:18 PM.
10-20-2010, 03:15 PM
#96
Extraordinary Engineering
No, but it's something I have to figure out. It's been mentioned in other threads relating to oil and engine cooling.
Given the low oil temps I'm seeing I consider this important. I imagine in Alberta the oil temps sometimes stay below freezing the entire trip!
Maybe I can get two small pizza heat-wave bags?
I found this link... http://www.aircraftspruce.com/catalo...aOilCooler.php
Last edited by DarkBrew; 10-20-2010 at 03:20 PM.
10-21-2010, 11:49 PM
#97
Registered
^^I am living in Vancouver now so it won't be nearly as cold as Alberta. . If i was in AB I would get a beater but it just isn't feasible here due to parking and other things.
I wonder if just getting something to block the air flow would help get the temps up.
. If i was in AB I would get a beater but it just isn't feasible here due to parking and other things. I wonder if just getting something to block the air flow would help get the temps up.
10-29-2010, 08:52 PM
#98
Registered
Join Date: Jul 2009
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Best brand is Snap-on of course but it cost an arm and a leg. If you want something on sale... I just bought Mastercraft Maximum Torque Wrench (1/2" drive) at Canadian Tires for $67.99 + tax. By the way nice write up you did last year regarding driving our 8's in winter. I'm doing it this year... hope all goes well.
