I did my old car calipers, I got a primer (white) and then painted on top of that. It was either caliper or engine paint, something with extreme high temps. It worked awesome and lasted for years. I didn't spray paint, I painted them. The primer was much thicker and was not a spray. Made painting it that much easier. Again IMO. Whatever you do I'm sure it will be good!

I'm not going to bother until I get the decals, cause I'm gonna do the primer (white) put on decal, paint black, take off decal, so white Rx8 with black caliper. Will match my white Rx8club.com decal on my black windows.

 

I heard that white lithium grease works well

I got another set of Racing Beat links

Let me know if you're ordering something from them... I might get new bushings

 

I'm gonna try to get the FD up and running so I can bring it down for the install meet.
Gonna take me a bit of time though. Gotta get the oil changed as well as the spark plugs. And God willing it'll start once I remove the faulty boost controller soldnoid.
If it doesn't co-operate, I'll simply pack things up and head down in the Miata.
Keeping my fingers crossed.

 

Scott, your clunking is probably from the swaybar mounts. When I installed my swaybars I tightened the mounts too much which must have pushed out the grease. After about a month I'd get a very loud clunk from the front when compressing one side of the car, like going up a driveway on an angle.

Like Warren said, white lithium grease will fix the problem. Apply generously and don't overtighten the mounts. I found torque specs for them somewhere here on the forum.

 

^ Thanks Eric. Coming to the meet?

 

I'm in for early since I have a friend to meet around 4ish. I just really want to fiddle with my Cobb.

 

So they did some tuning and the A/F gauge was reading 15 too high but every runs good so today they are changing the O2 sensor to see if that's it or I will need bigger injectors. so I will be Going to RPM around 5 tonight see the progress and maybe learn a thing or two. Hopefully it will be done for saturday even if it isn't I'm still coming by in my neon.

 

I'm there to assist with any LED installation, fogs, interior lights, and wiring for footwell lights

 

Oh ya does anyone know where to get bigger injectors cheap and quick I might need them.

 

Maybe. I don't know where you live. Assuming I'm not busy I can stop by.

 

I don't see any DIY for MS front bumper...wonder if it is much different than OEM?

 

I have the instructions for the speed kit if you need it thumper.

 

thx Chris, I was more looking for Thunder and Pros for their install of the front. Works quiet so thought I would do some reading. They may need it tho...

 

Doors will be open at 10am for those that want to come before noon -- lots to do!

Pros, please change the first post with revised time. Thx

 

Hrmmm... I'm not sure.. I heard the Dupli-Color is suppose to be alright. A coworker just painted his front calipars with the stuff on the weekend apparently.. checked them out and they look pretty damn good. Just not sure how well the stuff will last on the track with the additional heat. Does the stuff have a temp rating on it?

As Pro's said.. most people around here swear by G2... and apparently there's a place around ?lakeshore? called Performance Improvements that has it. Just not sure if it's in stock or not.

Anyways... I'll be painting them black. And yeah.. I'll go over how to install the footwell lights for this weekend.

 

I used Dupli-Color red and I has been done for a year at least no crack but I have never driven on the track.

 

^ says that it is good up to 260 degrees C / 500 degrees F.

Footman has some experience with footwell lights, so that should help with install

 

hrmmm... well.. 500 techincally should cover it... but I've heard of higher temps after the track.. oh well... guess we'll find out then huh?

Oh.. one other thing.. my coworker recommends getting another brush to paint it on... he said the one that comes with it stucks and he spend half his time picking out brush hairs from the paint.

 

K I will prob shoot for 11 then. I need some sleep.

Fire the barbie up around 12 1?

 

I wist i had red footwell lights to install as well.... anyone know where i can get some rx8strakes wants 2-3 weeks for shipping

 

What about rotaryrasp?

 

About 1pm for the BBQ

 

Perfecto!

Bring on the heat!!

 

Sweet. I will need an address though so I know where to go. PM me it.

 

actually... in looking at the crappytire paint and the G2... I think I'm going with the G2. The dupli-color is a mat finish... I want the high gloss which the G2 has in spades.