Notices
Australia/New Zealand Forum They come from The Land Down Under.

Redlined

Old Sep 21, 2003 | 02:23 AM
  #1  
RX-3_13B_Tommo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2002
Posts: 186
Likes: 0
From: Australia
Talking Redlined

Redlined our VR RX-8 yesterday. Took it up to 8k in second but had to stop because we were doing 97 in and 80 zone. ripped it up at the next set of lights and heard the 'beep' for the first time. Awesome!:p
Reply
Old Sep 21, 2003 | 05:41 PM
  #2  
dbb's Avatar
dbb
DSC Disabling Officer
 
Joined: Aug 2003
Posts: 468
Likes: 0
From: Adelaide, Australia
Heh.

I redlined the demo about 20 seconds into the test, pulling
out of the Mazda Dealership.

The salesguy warned me about it, and I promised to behave
after that.

I still hear the warning beep every couple of days, but I like
playing through the revs.

It is probably because my trade-in was a VVTi 6 speed Celica, which only performed if you spanked it hard. Because I had that for three years, my gear change habits have carried over. That's ok though, because the RX8 likes being spanked too. The main difference it doesn't make as much noise about it, and won't torque steer. Oh, and the RX8 is quicker. But you all knew that.
Reply
Old Sep 21, 2003 | 09:06 PM
  #3  
Kev's Avatar
Kev
[rapidus octus]
 
Joined: Aug 2003
Posts: 1,028
Likes: 0
From: Sydney, Australia
So does that mean that 0-100kmh is one shift? Or does it start to run out? (I'm still being gentle with just over 1000km on the clock.
Reply
Old Sep 21, 2003 | 09:20 PM
  #4  
dbb's Avatar
dbb
DSC Disabling Officer
 
Joined: Aug 2003
Posts: 468
Likes: 0
From: Adelaide, Australia
I've got about 2800 on the odo by now.

Anyway, I don't think it gets near 100 in 1st. The extra power above about 7500 doesn't seem to be huge. But I believe adding one of the soon to be released after market exhausts fixes that.

I'm usually too busy looking at the road and listening
to the engine when changing that high. I'd guess
around 70 or 80 kph before the 1st change is required.

I'm driving from Adelaide to Lismore, via Sydney, in 2 weeks, so I'll let you know what is does at the redline in 3rd as I find a suitable spot on the Hay plain ;-)
Reply
Old Sep 21, 2003 | 09:40 PM
  #5  
Kev's Avatar
Kev
[rapidus octus]
 
Joined: Aug 2003
Posts: 1,028
Likes: 0
From: Sydney, Australia
Speed in gears anyone...

I may be out in my base calc - comments?
Reply
Old Sep 22, 2003 | 03:43 AM
  #6  
msydd's Avatar
Registered User
 
Joined: May 2003
Posts: 214
Likes: 0
From: Sydney
Yeah, in the wheels mag comparing to the 350z they explained that one of the 8's advantages was that it was only one gear change 0-100km.

I agree with 3rd redline around 145km's
Reply
Old Sep 22, 2003 | 05:53 AM
  #7  
Hymee's Avatar
Race Steward
iTrader: (1)
 
Joined: Aug 2003
Posts: 5,430
Likes: 2
From: Brisbane, Australia
I agree.

I found this unusually straight peice of road with this speed trap thingy on it. It was really wierd, as there was a set of lights about 400 metres before the speed trap.

I observed this RX8 was going through the speed trap just as it hit the RPM limiter (9,500?) in 3rd, and he was doing about 148.58 km/h. And it took him 15.099 seconds to get there.



(I know this guy, and he has a mate who reckons... :p )

Cheers,
Hymee.
Reply
Old Sep 22, 2003 | 06:21 AM
  #8  
Wildcard's Avatar
NT Rotorhead
 
Joined: Aug 2003
Posts: 746
Likes: 0
From: Katherine, NT
Kev - those gear calcs look spot on to me. Apparently the car will do 231 in 6th (or so I am told) :D
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Carbon8
RX-8's For Sale/Wanted
42
Feb 27, 2020 08:39 AM
fourwhls
RX-8's For Sale/Wanted
7
Feb 20, 2019 05:16 PM
OfficerFarva
RX-8's For Sale/Wanted
16
Dec 5, 2015 10:53 AM
jasonrxeight
RX-8's For Sale/Wanted
2
Sep 30, 2015 01:53 PM
XianUnix
Series I Trouble Shooting
6
Sep 29, 2015 03:48 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 05:26 PM.