OZZY Custom Turbo Install
#226
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by takahashi
Try to drive it properly in the next year's Nats and hopefully drives faster than the STIG :D Right, Revolver?
And at least I drove home on Sunday!!!!
#228
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Maxxx
Cool....how where the Nats....
Did Mazda have their turbo RX8 there ???
I bet the Hymee and RM car were prety cool......
Will chat to Rotormaster when i go for a test drive about it........
Must have been prety cool........especialy for the first timers........nothing like no speed limits to obay.......
Did Mazda have their turbo RX8 there ???
I bet the Hymee and RM car were prety cool......
Will chat to Rotormaster when i go for a test drive about it........
Must have been prety cool........especialy for the first timers........nothing like no speed limits to obay.......
One of the best weekends I've ever been to for sheer fun and friendly camraderie.
And of course the Hymee and RM cars were great to see (and hear). The MA turbo car didn't go on the track but it was accompanied by the new MX5 and the lovely Jodie so all in all there was plenty to drool over.
#230
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Maxxx
Yes in the Shire...........
Sorry it's me and my love...the car i mean....lol
Sorry it's me and my love...the car i mean....lol
#231
Originally Posted by Revolver
Well, so far I've fitted the Hymee catback, Whiteline adjustable sways and the RP short shifter (together with various bling, which I won't bore you with).
The cautious side of me is saying don't even bother with FI until the warranty has run out (still two years to go for me) and the various kits on offer have been around long enough for any bugs to have been ironed out but every now and then I get impulsive so who knows?
Maybe Hymee could use a Sydney demo car!!!
Of course, then I'd have to upgrade the wheels.
The cautious side of me is saying don't even bother with FI until the warranty has run out (still two years to go for me) and the various kits on offer have been around long enough for any bugs to have been ironed out but every now and then I get impulsive so who knows?
Maybe Hymee could use a Sydney demo car!!!
Of course, then I'd have to upgrade the wheels.
Will be going for a test drive in the RM car next week......So will have some answers....
Any questions you guys want me to ask???
I have a long list of my own........lol
#233
Registered User
Thread Starter
Join Date: Dec 2004
Location: Gold Coast Australia
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by EZZY
back to the topic..... where is ciao?
Thanx Eric for your PM .And all who support honesty , integrity
I have a Top quality kit ,only using the best materials . If it is too cheap , by all means pay more for what you think is better .I have'nt indicated exact prices by the way , only approximates .
I designed the turbo , ( specs / trim )and had it built in Aust .by the best in the biz , using revoloutionary efficient bearings and garrett housings .This turbo is up to 20% more efficient than a garrett roller bearing turbo ...I would have SAVED money using a garret roller
Mazda has $$$$$ spent on R&D on their turbo concept( hundreds of thousands ) .
Information that I have had access to . And with their budget, I am sure the managementTHEY chose is tip top .Having said that , we have made changes to the management making it applicable to my turbo and application
I have endeavoured to harness my own knowledge of rotaries & engineering as well as racking the brain of all experts in this field ,to achieve what is to be the best kit I know how to produce .
The initial idea was to make my own kit for myself . As stated earlier in the piece , I am a semi -retired 31yr old wanting something to do in my spare time .This , to me was an exciting challenge which has seen its fare share of issues ( not all to do with the kit !)
The only reason I entertained the option of selling this KIT , was the abundance of genuine interest for IT ,
So on with the show , once the miles are up on the test car / mule , I will take the next step
Thanx again for all of your overwhelming support
Smile Lots
Dave
#234
Good to hear Ciao, im sure most people are intrigued on how it will perform for power, durability and overall value.
I would be keen on catching up when i head to Coffs Harbour in Jan.
Anywayz ill be in touch,
let us know if you have anymore details, videos etc..
Adrian
I would be keen on catching up when i head to Coffs Harbour in Jan.
Anywayz ill be in touch,
let us know if you have anymore details, videos etc..
Adrian
#235
Registered User
Thread Starter
Join Date: Dec 2004
Location: Gold Coast Australia
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ageo
Good to hear Ciao, im sure most people are intrigued on how it will perform for power, durability and overall value.
I would be keen on catching up when i head to Coffs Harbour in Jan.
Anywayz ill be in touch,
let us know if you have anymore details, videos etc..
Adrian
I would be keen on catching up when i head to Coffs Harbour in Jan.
Anywayz ill be in touch,
let us know if you have anymore details, videos etc..
Adrian
Originally Posted by Ageo
let us know if you have anymore details, videos etc..
Final dyno figurers out soon . ...Another long Line up
Ciao
Dave
#237
Registered User
Thread Starter
Join Date: Dec 2004
Location: Gold Coast Australia
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Your again attacks with no l proof is astounding the people associated with my project dont need any introduction .the fact you repeatedly jump on this thread further solidifies your disscrediting farse . You have no credability whatso ever and your comments are not welcome here ..Wanna say something stupid ,.PM me .your hole is dug deep enough No further comments to you
Ciao
Dave
Ciao
Dave
Last edited by Ciao; 10-27-2005 at 07:01 AM.
#238
New Member
Originally Posted by Revolver
Hmm, I'm not sure which is more embarrassing - my lap time (considering it was only my second go at track driving) or yours (considering how much we've heard about your track experience and car mods, not to mention the STIG shirt)!!! :fawk:
And at least I drove home on Sunday!!!!
And at least I drove home on Sunday!!!!
Back to Ciao's tubro.
I still don't know what all these are about... I am prepare to let Ciao R&D further more before making any comment... as he says he is still in the journey. Wait until he blew the engine then you can put this flag Otherwise, please still respect this man for what he is doing to HIS car...
#239
Registered User
Join Date: May 2004
Location: Sydney
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Maxxx
Mazda spent how much.........yeah rite................i hear on this fourum and the aussie one and also another popular rotary fourum that they didn't even run their car at the RX8 nationals.............why do you think that would be........what a joke.............
a while back Rotormaster's turbocharged RX8 was borrowed by a few guys from Mazda..........low and behold .......a skunk works turbo RX8 pops up.........what the ??!?!??!?! bits of carbon fiber from the guys who made the bits for the RX7 SP.....wow......
i know more that the guys from Mazda who put this turbo RX8 together.......and thats a fact JACK.............if they had the smarts that you seem to think they do............they would have a merchantable SP version after nearly 2 years............
You also are a real sales man.......fantastic.........WHO build this turbo then??????? Someone more advanced in turbomachinery that the engineers at Allied Signal ??!?!?!? Think not.........have you got a patent on the advanced bearing design......since the Garett GT ceramic ball bearings are inferior......... do you eaven know what 20% more efficient means in turbomachinery terms........to be that much more efficient you need a new turbine wheel trim and also a compressor wheel trim........with the correct A/R compressor and turbine housings........you need to be able to calculate the theoretical pressure ratios and flows amongst other things.........and then compare to experimantal values...............have you got a ISO 17025 accredited Calibration Laboratory for Pressure and Gas Flow measuring..................if so, can we have a compressor and turbine map.............. Please enlighten me.........
i will not even get into the engine management issue..............
Im a mechanical design engineer at a multi national company so stop trying to get one up on me in the engineering department............you will lose every single time..............i pull management in line and put sales men on their *** all the time........can not stand their BS................
I bet you are real smooth with the ladies...........well I aint no bitch...........
if you have the proof i will apoligise, like i said in the reply to your legaly threatening PM................
zoom44 if im getting out of control please do pull me aside.........im fumming
a while back Rotormaster's turbocharged RX8 was borrowed by a few guys from Mazda..........low and behold .......a skunk works turbo RX8 pops up.........what the ??!?!??!?! bits of carbon fiber from the guys who made the bits for the RX7 SP.....wow......
i know more that the guys from Mazda who put this turbo RX8 together.......and thats a fact JACK.............if they had the smarts that you seem to think they do............they would have a merchantable SP version after nearly 2 years............
You also are a real sales man.......fantastic.........WHO build this turbo then??????? Someone more advanced in turbomachinery that the engineers at Allied Signal ??!?!?!? Think not.........have you got a patent on the advanced bearing design......since the Garett GT ceramic ball bearings are inferior......... do you eaven know what 20% more efficient means in turbomachinery terms........to be that much more efficient you need a new turbine wheel trim and also a compressor wheel trim........with the correct A/R compressor and turbine housings........you need to be able to calculate the theoretical pressure ratios and flows amongst other things.........and then compare to experimantal values...............have you got a ISO 17025 accredited Calibration Laboratory for Pressure and Gas Flow measuring..................if so, can we have a compressor and turbine map.............. Please enlighten me.........
i will not even get into the engine management issue..............
Im a mechanical design engineer at a multi national company so stop trying to get one up on me in the engineering department............you will lose every single time..............i pull management in line and put sales men on their *** all the time........can not stand their BS................
I bet you are real smooth with the ladies...........well I aint no bitch...........
if you have the proof i will apoligise, like i said in the reply to your legaly threatening PM................
zoom44 if im getting out of control please do pull me aside.........im fumming
I can see where ýou're coming from.. but just chill a bit...
"IF" Caio is full of BS.... then it will all come out in the end.. but for now lets just sit back and see what comes to fruition from his little project.
Any FI project is good right?? it will either show us what to do or what not to do..
repeat after me..
breathe in...
breathe out...
serenity now...
#240
cry me a river...
Join Date: Dec 2003
Location: Syd / Melb
Posts: 4,475
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LittleJohn
repeat after me..
breathe in...
breathe out...
serenity now...
breathe in...
breathe out...
serenity now...
i think it time for a
lets sit back and have a drink
#241
Banned
Join Date: Oct 2005
Location: left at Albakerky
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
MAXXX
What a trmendous piece of edifcation,R U all about trashing this thread or R U actually going to give us some imput that is going help us all instead of
Skunk Worx Eh?.....Turbo RX8.........?????mmmmmmmmmmm
You've not heard of Allan Horsley(Maxdas Motor Sport Manager)?
That comment alone should have the Maxda Fans/moderators turning in their grave.
Have U not seen the video post of Ciaos turbo RX8,From 80km/hr accelerate from the car next him as if it was standing still looks like pretty good proof to me AND,the 1st dyno pull stats I'm impressed & I believe the cars not fully
tuned.
Stop trying to hyjack this thred!
have u not read the review? or R U full of
Here we have a guy whos able to put a kit together for less than 10 grand that looks great .
U R THE Typical key board warrior :fawk: .
Crap on some where elses forum
I agree with TAKA
we should respect this man & realise what he has achieved.
Keep up the good news Ciao there will always be 's like this out there
to discredit the good work that other people do.
OH Jealousy...............mmmmmmmmmmmm
Go Away
Carl
What a trmendous piece of edifcation,R U all about trashing this thread or R U actually going to give us some imput that is going help us all instead of
Skunk Worx Eh?.....Turbo RX8.........?????mmmmmmmmmmm
You've not heard of Allan Horsley(Maxdas Motor Sport Manager)?
That comment alone should have the Maxda Fans/moderators turning in their grave.
Have U not seen the video post of Ciaos turbo RX8,From 80km/hr accelerate from the car next him as if it was standing still looks like pretty good proof to me AND,the 1st dyno pull stats I'm impressed & I believe the cars not fully
tuned.
Stop trying to hyjack this thred!
have u not read the review? or R U full of
Here we have a guy whos able to put a kit together for less than 10 grand that looks great .
U R THE Typical key board warrior :fawk: .
Crap on some where elses forum
I agree with TAKA
we should respect this man & realise what he has achieved.
Keep up the good news Ciao there will always be 's like this out there
to discredit the good work that other people do.
OH Jealousy...............mmmmmmmmmmmm
Go Away
Carl
Last edited by CarlRX8; 10-27-2005 at 08:17 AM.
#246
Registered User
Thread Starter
Join Date: Dec 2004
Location: Gold Coast Australia
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MissRx8
y u do dat to me? wat did i do to u
Those are my favourite pics......Cute hey???
Last edited by Ciao; 10-27-2005 at 08:32 AM.
#248
cry me a river...
Join Date: Dec 2003
Location: Syd / Melb
Posts: 4,475
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ciao
Sorry that was general terms not to you Kall
Those are my favourite pics......Cute hey???
Those are my favourite pics......Cute hey???
the mods will have to you
#249
Hi all,
this is my first post. Have been very interested in this thread as I have waved the idea of purchasing the 06 STi or a EVO IX to purchase a used RX8 and to then install a turbo kit. I have also had a line of turboed cars.
I more than likely would not of posted at all except the comments from Maxx annoyed me somewhat.
Mate, I have never heard anyone blow there trumpet like you have. I am a mechanical engineer of a multinational; Ive owned a 9 sec car; Dont go there as I know everything bla bla.
You sound like a loud mouth American.
For someone who hasnt even driven the rotormaster car yet you are full of unexplained praises. Why not after you test drive the supercharged RX8 fly up to QLD and test drive the turboed RX8. Then give us your unbiased comments. I might then actually listen to you.
Seriously its costs next to nothing to fly there and for a big wig of a multi national Im sure it wont hurt your piggybank. All you may need to do is ask Dave nicely for the keys.
this is my first post. Have been very interested in this thread as I have waved the idea of purchasing the 06 STi or a EVO IX to purchase a used RX8 and to then install a turbo kit. I have also had a line of turboed cars.
I more than likely would not of posted at all except the comments from Maxx annoyed me somewhat.
Mate, I have never heard anyone blow there trumpet like you have. I am a mechanical engineer of a multinational; Ive owned a 9 sec car; Dont go there as I know everything bla bla.
You sound like a loud mouth American.
For someone who hasnt even driven the rotormaster car yet you are full of unexplained praises. Why not after you test drive the supercharged RX8 fly up to QLD and test drive the turboed RX8. Then give us your unbiased comments. I might then actually listen to you.
Seriously its costs next to nothing to fly there and for a big wig of a multi national Im sure it wont hurt your piggybank. All you may need to do is ask Dave nicely for the keys.
#250
I THINK should get off this thread cause the amount of crap hes comming up with is quite annoying.Hes got this verry "little man" syndrome thing about him,big words high and mighty powerfull.HEY how about asking "chow" some questions ,instead of telling us a whole lot of junk thats untrue?Like everyone has been saying ,lets wait and see what "ciao"has got to show all of us.The "ciao "kit isnt even finished yet!
I do understand ,theres always someone out there with no life no self esteem that has to try to bring someone else down to their level.I think they call it the" tall poppy syndrome" when someone (or something)stands out and they get pleasure cutting it down!!!
Thats the way society breed's some of us.
You can't change that but I think you can BAN THEM
I also think It would be good to hear how you could help,Imean with all that experience you've got .How about putting it to good use?
ASK A FEW QUESTIONS AND MAYBE YOU COULD HELP WITH THE ANSWERS!!!!
BECAUSE YOU KNOW EVERTHING!!!!
I do understand ,theres always someone out there with no life no self esteem that has to try to bring someone else down to their level.I think they call it the" tall poppy syndrome" when someone (or something)stands out and they get pleasure cutting it down!!!
Thats the way society breed's some of us.
You can't change that but I think you can BAN THEM
I also think It would be good to hear how you could help,Imean with all that experience you've got .How about putting it to good use?
ASK A FEW QUESTIONS AND MAYBE YOU COULD HELP WITH THE ANSWERS!!!!
BECAUSE YOU KNOW EVERTHING!!!!