Notices
Australia/New Zealand Forum They come from The Land Down Under.

Mellow Yellow gets Hymeed

Thread Tools
 
Rate Thread
 
Old May 27, 2005 | 06:27 PM
  #1  
Richard Paul's Avatar
Thread Starter
Registered
iTrader: (5)
 
Joined: May 2004
Posts: 2,438
Likes: 20
From: Chatsworth Ca
Mellow Yellow gets Hymeed

Got my Hymee exhaust installed today, couldn't wait, kinda like a kid who has to pee. Standing there holding it and shaking.
I posted a new thread on the aftermarket forum.
Just wanted to be sure all you Oz folks saw it.

I really hate giving Hymee to much credit considering he is a compeditor, so I'll just give it all to his fab man who I think is Les. :p If that's who it is you have my complements, great welding and of course fitting too. It fit perfect, the tips were even with no tweeking needed. Nice work. And I don't usually like my own work so you know what I think of everyone else.
Reply
Old May 27, 2005 | 08:04 PM
  #2  
sco's Avatar
sco
Registered
 
Joined: Aug 2003
Posts: 1,459
Likes: 0
From: Brisbane, Australia
Lex does a good job - I've been lucky enough to watch his handywork. I'm sure it looks almost as good as the one on mine. Lucky you got a yellow car - you won't need to wash it if a bit of that pee splashed the duco.
Reply
Old May 27, 2005 | 08:15 PM
  #3  
xxup's Avatar
Registered User
 
Joined: Apr 2005
Posts: 1,028
Likes: 1
From: Brisbane, Australia
Careful Hymee - I think that he is trying to smooth talk you into something... Perhaps an extra big discount on the Scanalyser? :p
Reply
Old May 28, 2005 | 08:55 PM
  #4  
Hymee's Avatar
Race Steward
iTrader: (1)
 
Joined: Aug 2003
Posts: 5,430
Likes: 2
From: Brisbane, Australia
Thanks Richard. Nice to get compliments from someone I hold in high regard.

sexup, He already got the "big discount" I just haven't sent it yet.

BTW - dig you get lost? The last time I saw you you said you were on the way to the shop.

Len has his work cut out now :D

Cheers,
Hymee.
Reply
Old May 29, 2005 | 12:01 AM
  #5  
xxup's Avatar
Registered User
 
Joined: Apr 2005
Posts: 1,028
Likes: 1
From: Brisbane, Australia
I got to the shop and realised that a Pentium II 233 was not going to be of much use..

I am looking for a new notebook AND waiting for you guys to confirm the USB-> rs-232 link as the new notebooks (that I have seen so far) no longer have a RS-232 port.. If anyone knows one - please name, but I really prefer Toshiba as a brand..

The cheaper notebooks are really bulky so I will need an extra screen (ie touch screen with mouse drag abilitty) to use the thing in the car.. There is no room for the finance director to hold a widescreen notebook on her lap...

A small thin notebook is around the 5k mark - no says the Finance Director... I'll get there - you haven't run out yet have you??
Reply
Old May 29, 2005 | 01:06 AM
  #6  
azzaboynt's Avatar
Registered User
 
Joined: Jan 2005
Posts: 322
Likes: 0
From: Sydney, Australia
Originally Posted by xxup
I got to the shop and realised that a Pentium II 233 was not going to be of much use..

I am looking for a new notebook AND waiting for you guys to confirm the USB-> rs-232 link as the new notebooks (that I have seen so far) no longer have a RS-232 port.. If anyone knows one - please name, but I really prefer Toshiba as a brand..

The cheaper notebooks are really bulky so I will need an extra screen (ie touch screen with mouse drag abilitty) to use the thing in the car.. There is no room for the finance director to hold a widescreen notebook on her lap...

A small thin notebook is around the 5k mark - no says the Finance Director... I'll get there - you haven't run out yet have you??
Just got a harvey norman catalogue in my sunday paper this morning and saw a new Toshiba Liber something or other model u100. Nice and small with wifi and bluetooth... My next contender for replacing my Toshiba protoge r100. The missus raised her eyebrow and pointed out all the other laptops decorating the office and house, and wondered where her diamond tenis bracelets were... :o
Reply
Old May 29, 2005 | 03:37 AM
  #7  
xxup's Avatar
Registered User
 
Joined: Apr 2005
Posts: 1,028
Likes: 1
From: Brisbane, Australia
Hey azzaboynt do you want to sell one of your old but suitable for the Scanalyser notebooks for a massive tax loss??
Reply
Old May 29, 2005 | 04:09 PM
  #8  
azzaboynt's Avatar
Registered User
 
Joined: Jan 2005
Posts: 322
Likes: 0
From: Sydney, Australia
My wife owns a software company... Already a massive tax loss...

Anyone want to purchase military grade audit and control software?
Reply
Old May 29, 2005 | 05:17 PM
  #9  
timbo's Avatar
rock-->o<--hard place
 
Joined: Sep 2003
Posts: 3,242
Likes: 0
From: Canberra, AUSTRALIA
Is that the one used by Defence where, as reported last week, they could not even audit the location of their tanks?? :D
Reply
Old May 29, 2005 | 05:57 PM
  #10  
Hymee's Avatar
Race Steward
iTrader: (1)
 
Joined: Aug 2003
Posts: 5,430
Likes: 2
From: Brisbane, Australia
Timbo sinks knife in then twists it... :D
Reply
Old May 29, 2005 | 10:27 PM
  #11  
azzaboynt's Avatar
Registered User
 
Joined: Jan 2005
Posts: 322
Likes: 0
From: Sydney, Australia
Originally Posted by timbo
Is that the one used by Defence where, as reported last week, they could not even audit the location of their tanks?? :D
Haw haw haw :D

Serves them right for not gettin OUR software. However we never tendered for that contract. Actually our audit software keeps tabs on the systems admins and all users. If people just misplace a couple of tanks by forgettin to log their locations....

Wife: Honey, there is something big and green in the garage
Soldier: oh? So THAT'S where it went... :p
Reply
Old May 29, 2005 | 11:22 PM
  #12  
timbo's Avatar
rock-->o<--hard place
 
Joined: Sep 2003
Posts: 3,242
Likes: 0
From: Canberra, AUSTRALIA
Me bad!

But hang on! I'm always telling Sys admins to get lost! ....I now fear retribution :D
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
IamFodi
Series II Interior, Audio, and Electronics
28
Oct 31, 2018 06:37 AM
Trancemission
RX-8 Multimedia/Photo Gallery
46
Dec 2, 2015 07:26 PM
05rx8mazda
RX-8 Parts For Sale/Wanted
18
Nov 28, 2015 09:42 AM
Paul_Y
New Member Forum
21
Sep 21, 2015 02:23 PM
Steve Dallas
RX-8 Parts For Sale/Wanted
0
Sep 19, 2015 09:39 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 06:49 PM.