Thinking of changing front pads to EBC greenstuff priced $260.00, my rear pads are only 40% worn i would change them as well however so far the EBC crowd only has front pads for the RX8 CAN someone RECOMEND ANOTHER BRAND THAT WONT brake the bank .

Is changing the front without the rears ok??

cheers
michael

 

it's better to change both front and rear at same time

 

oh btw, would u consider mazdaspeed, i know the price is abit high but u get what u pay for

 

how about DBA?
where is DBADave when you needed him :D

edit: just chekced out dba.com.au and seems like they dont have any brake pads... my bad :D

 

That'd be dbasteve, EZZY!! dbadave does roll off the tongue better though .

 

Mez,

Who's Steve?(aka Dave) is he a member, tried a search to no avail?

Mike

 

Mez,
Wish i hadn't chipped in now, found via a google. Sorry.
"Steve Gavin from DBA" i assume
L&L good thread on various pads
http://www.mrtrally.com.au/forums/topic.asp?TOPIC_ID=36

Mike

 

Axxis Ultimates. Ceramic enhanced performance brake pads.


I changed my rotors also. These are really nice pads. They are really popular in the M3 communty. They have a slighty higher coefficient of friction than stock, and will work at hotter temps. They only have fronts available now. They are quiet also.


Axxis Ultimates for RX8

 

mikeyr

Your forgiven about the yellow j/ks great find

cheers
michael

 

Yep, Steve Gavin is the guy. He is a forum member.... here's a thread on his brakes.

Gomez.

 

oops... have to admit that im not so good with names.... there must be a dave somewhere i know :D

 

I thought DBA only have rotors?!?!

MazdaSpeed brake is good for stock rotor only. They go up to 600 degree.
They are about $250-$280 a pair shipped. It is kind of expensive.

I am into Japanese ones so Project mu and Endless will be used for the DBA rotor.
They are about 28000 Yen so just less than $300. They are much better for track than MazdaSpeed as they have temp up to 900 (for P.MU Level 900)

EBC green is a good brand but my friend GTR use it for track and burned it off ina day. It was hard to dig the GTR out of hte kitty litter. :p I am sure local brand are as good as the Japanese ones but I have no idea about them, that is all.

 

Yes... Luke used your friend and his gtr as an example a couple of times the other Friday :o

 

Taka,
U'r right on DBA being only rotors but Dave has some great reviews on pad/rotor combos.

Do you have the 4000 series and mu pads on yours now? Have seen the Mu pads here in NZ, wondering how much the rotor's set you back? Much improvement?

M

Must be a good mate if you dug him out of the cat tray! LOL, get a photo next time, right place for a GTR:D

 

I am planning on getting the 5000 series front slotted and 4000 series slotted for the rear. But my pad/rotor has not worn out yet. I still have the stock rotor with MazdaSpeed pads. When one of those gone... I will put P.MU with DBA rotors. The prices that DBA Steve quoted is similar to the one I quoted from Local Autobarn. Must be the RRP.

I wonder how much better of the 5000 series cf the 4000 series, it is essentially double the price.

Do you know how much is the replacement rotor cost from Mazda? I am calling to get a price....
I am going to give you a shock...
These are the prices for the STOCK brake pads and brake rotor replacement costs. (not inc. labour)

Front $495 each
Rear $265 each
Front Brake pads $166 pair
Rear Brake pads $110 pair

There you go

 

Ouch, may start with pads and let you do the "live animal" testing on the rotors for now!

 

I have edited the thread above

You see the prices from Mazda are the stock rotor and pad replacements

Mazda front $495 to replace. DBA steve 2 piece slotted rotor $465. Easy choice there!

Single piece slotted. $242

I am not replacing my pads and rotor at Mazda for sure

 

Great info thanks Taka...has a bookmark all it's own ...for later...!

 

Probably no TSB's issued by Mazda Australia for the pad problems. In the U.S.- they've extended the service if you complain to 36 months 50,000 miles. They repalce them with a new softer compound organic pad set--save you lots of money http://www.finishlineperformance.com...6-04-1369b.pdf

 

All I can say is my new Endless are perfect Well worth the money I reckon, one of the most important parts of the car in terms of saftey.

Cheers,
Hymee.

 

Which Endless brake pad do you have?

EDIT: Centrax has a clearance of the old Endless model earlier on... the model is NA - something. NA-S?

Did you get them cheap??

 

Taka,

Type SSS. The best thing I liked about these was there temp range. 0 to 500 degrees C.

Endless spend almost endless amounts of money on pad R&D.

Cheers,
Hymee.

 

For everiday use i am looking at getting HAWKS HPS OR HP OR FERODO XL or FERODO FORMULA .

HYMSTER SHOULD LOOK INTO MAKING A CONTACT WITH THESE brands of pads when he goes to the U.S

Fast track driving is not only about relyng on your brakes for great lap times .

cheers
michael

 

You might be surprised how good my pads feel on the road. Since they work from 0 degrees, they have good stopping power when cold. And I reckon they work better in the wet than the old ones.

I might have a brake pad offering soon...

Cheers,
Hymee.

 

Bendix are putting out a brake pad for the RX8 front and rears I WILL BE TRIALLING THEM next week i will let you guys know what i think .

The price should be very reasonable ESPECIALLY IF SOME OF YOU GUYS SHOW INTEREST

cheers
michael