SCVRX8

I am sure this is posted somewhere on this site but i cant find it. What size wheel spacers can I use on a bone stock R3 with no issues.
An answer or a link is all thats needed.

wazup_shorty

The more you go wide without droping the car, the more it will look weird, stock height Id say a 10mm would be fine, but you could probably fit up to 20-22mm without a problem

godesshunter

https://www.rx8club.com/series-ii-wh...pacers-232727/

Im guessing you already saw that. I wouldn't go much farther.

Suspension

I use 15 mm, bolt-on spacers. I tried 10 mm, but there is not enough clearance between the stock studs and the backside of the wheel. So 15 mm is minimum, 20 mm works as well.

Unless you install extended studs, then you can use any spacer you want.