You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join RX8Club.com today!
Hey i got it on and bolted, everything is going well but i need to reconnect the wires on the top. How do i tell which ones go to which, I can't see anything that shows they are labeled! Please help.
thanks
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on RX8Club.com!
They are color coded... 2 white and 2 black.
Doesn't matter if you mix between the two black harnesses or the whites.
Just can't plug the white harness into the black's or the other way
__________________ Current Mods: RB REVi Intake & Ram Air Duct, AP Catback Exhaust, MazSport DR Midpipe, AP Pulley, BHR Ignition Coils, BHR/SPEC Flywheel, ACT Counterweight, Exedy Stage 1 Clutch Kit, HD Release Bearing, AccessPort w/MazdaManiac tune, REmedy Thermostat & Water Pump, AFE Short Shifter, Lotek Pod with ProSport Gauges, Axxess iPod Adapter, Illuminated Shift Knob, Bridgestone Potenza RE760, OPTIMA 35 RedTop Battery. Oils: Engine= Royal Purple 5w30, Trans= Redline MT-90, Diff= Redline 75w90
ahh, thats what i wasn't sure of, i noticed on teh 2 white ones the wires on one side were blue/black and on the other side they were both grey so i figured it mattered. Awesome, thanks. When im done today ill siphon through the pictures and write a clutch replacement thread to rival yours Jon!
Linear Mode
