***ok Much Needed Response***
#1
Registered
Thread Starter
iTrader: (2)
Join Date: Feb 2007
Location: Wiscansin
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
***ok Much Needed Response***
ive read thru the threads and so far ive got these bits of info
1. run the power for amp thru the fire wall behind the washer fluid reservoir or thru the rubber approx. 6 inches away from the washer fluid route.
2. run the remote line off of an ignition controlled 12v. line like the rear "cigarette lighter" plug.
so now i have power to my amp and a switch (ignition) what do i do next?!?!? (as far as speakers go)
1. run the power for amp thru the fire wall behind the washer fluid reservoir or thru the rubber approx. 6 inches away from the washer fluid route.
2. run the remote line off of an ignition controlled 12v. line like the rear "cigarette lighter" plug.
so now i have power to my amp and a switch (ignition) what do i do next?!?!? (as far as speakers go)
#4
Deals on wheels
Actually the Rubber Grommet is on the driver side, the Washer fluid is on the Pass side.
The pass side is shorter but you have to drill through the firewall
the driver side is longer, but no drilling.
But yeah we have to know what you want to do in order to give you advice on it.
The pass side is shorter but you have to drill through the firewall
the driver side is longer, but no drilling.
But yeah we have to know what you want to do in order to give you advice on it.
#5
Registered
Thread Starter
iTrader: (2)
Join Date: Feb 2007
Location: Wiscansin
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
i am asking how i hook up the speakers to the amp
somewhere i read that you should slice the RCA wires and solder them to the rear speakers is that a good idea or no?
and what do i do with the amp thats in the back of the rx8 by the rear speakers
it would be great if you could just direct me to a thread that has step by step instructions otherwise just tell me here
and dont tell me to hae someone else do it because i can its just i need someone to tell me how to do it.
wow i sound like the biggest noob ever...w/e...plz help
somewhere i read that you should slice the RCA wires and solder them to the rear speakers is that a good idea or no?
and what do i do with the amp thats in the back of the rx8 by the rear speakers
it would be great if you could just direct me to a thread that has step by step instructions otherwise just tell me here
and dont tell me to hae someone else do it because i can its just i need someone to tell me how to do it.
wow i sound like the biggest noob ever...w/e...plz help
#6
Start with what kind of speakers you have, where you plan on placing them, size, specs etc. Then detail what amp you have, if possible take a photo or two and try to explain what you're hoping to do where, and you should get some good advice.
#7
resU deretsigeR
Join Date: Jan 2006
Location: Jacksonville, FL
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by abbid
And i quote, from https://www.rx8club.com/rx-8-discussion-3/how-do-i-install-amp-subs-109027/ :
#8
Registered User
Join Date: Aug 2006
Location: Virginia
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
try this website www.the12volt.com
Thread
Thread Starter
Forum
Replies
Last Post
SayDfuse
Series I Exterior Appearance and Body Kits
3
08-03-2015 10:41 PM
ahyuo121
New Member Forum
3
08-03-2015 01:52 AM