View Full Version : Midepipe cel problem, fixed!


modena
09-23-2005, 05:04 PM
Many thanks to a fellow member of this board for a simple and cheap fix!
No more cel lights due to an installed midpipe.
Fix was easy: small adapter fits between the 02 sensor and you are good to go.
(The Casper electronic fix did not work)



Thanks “gtaw”

Here is the tread where I found it:
http://www.rx8club.com/showthread.php?t=64222

TeamRX8
09-23-2005, 11:05 PM
thanks, I had been looking for that thread and wondered what ever happened to that guy

cgrx
09-24-2005, 10:20 AM
^^ me too



How many miles traveled w/o CEL ?

modena
09-24-2005, 10:34 AM
160 now,
Before the adapter, cel came on at about 24 miles.
Happened 3 times...
(Disconnected the battery for about 2 ours each time to reset light)
Tried the Casper electronic unit and cel came on in 5 miles.
Remove Casper unit and installed adapter, seems to be "cured" now...
The guy I got it from ships fast, ask him and you should be golden next week :)

This is how it looks like under the car...
(Not my picture)

RX8PDX
09-26-2005, 05:08 AM
I had a 02 Subaru Impreza, that I put an exhaust on. Got a CEL probably for the same reason.

I got one of these adapters, and it worked for about 50 miles.

So good luck, I hope it works for you.