Midepipe cel problem, fixed!
1 Attachment(s)
Many thanks to a fellow member of this board for a simple and cheap fix!
No more cel lights due to an installed midpipe. Fix was easy: small adapter fits between the 02 sensor and you are good to go. (The Casper electronic fix did not work) Thanks “gtaw” Here is the tread where I found it: https://www.rx8club.com/series-i-tech-garage-22/solution-cel-midpipes-racepipes-64222/ |
thanks, I had been looking for that thread and wondered what ever happened to that guy
|
^^ me too
How many miles traveled w/o CEL ? |
1 Attachment(s)
160 now,
Before the adapter, cel came on at about 24 miles. Happened 3 times... (Disconnected the battery for about 2 ours each time to reset light) Tried the Casper electronic unit and cel came on in 5 miles. Remove Casper unit and installed adapter, seems to be "cured" now... The guy I got it from ships fast, ask him and you should be golden next week :) This is how it looks like under the car... (Not my picture) |
I had a 02 Subaru Impreza, that I put an exhaust on. Got a CEL probably for the same reason.
I got one of these adapters, and it worked for about 50 miles. So good luck, I hope it works for you. |
All times are GMT -5. The time now is 12:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands