pelucidor
04-14-2004, 06:01 PM
Thought I'd post this just to show that it's not only RX-8s that can have little problems (actually I never had any problems with my RX-8 except weak AC)...
I got a G35 Sedan with 6MT last October. My tranny was slightly notchy in all gears until about 2500 miles (I assume because it was new and tight). From 2500-6000 miles it was superb in every gear under all conditions - a truly wonderful gearbox IMO, although the RX-8/Miata/S2000 ones are better.
Since 6000 miles I sometimes had trouble getting into 6th whilst accelerating quickly (e.g. when I went through 1st-3rd or 4th and then skipped to 6th at 80mph or so). It felt like I was locked out of 6th (like the lockout for reverse), but hitting the clutch a 2nd time always made it work. Dealership could not reproduce problem.
Since 6500 miles to present (7500 miles) I get a grind when moving into 6th gear (crunching sound as if the synchro-mesh is not working properly). It happens every single time under every condition. It is so consistent I can do tests around it: clutch fully down as far as it can go right to the floor (grind), high speed move from 4th to 6th or 5th to 6th (grind), low speed gentle move to 6th at 2500rpm from 5th (grind), count 2 secs before moving stick out of neutral to 6th (grind) etc.
The only way to avoid the grind is to double clutch (clutch pedal in, move to neutral from lower gear, clutch out, clutch in move to 6th, clutch out). Every other gear is fine under all conditions and driving behaviour, so now I am mostly avoiding 6th altogether.
I did a search on various G35 forums and it seems some people with grinding in certain gears need a new gearbox. Am I one of those people? Stay tuned to find out (I already have the answer but a little anticipation never hurt)...
I got a G35 Sedan with 6MT last October. My tranny was slightly notchy in all gears until about 2500 miles (I assume because it was new and tight). From 2500-6000 miles it was superb in every gear under all conditions - a truly wonderful gearbox IMO, although the RX-8/Miata/S2000 ones are better.
Since 6000 miles I sometimes had trouble getting into 6th whilst accelerating quickly (e.g. when I went through 1st-3rd or 4th and then skipped to 6th at 80mph or so). It felt like I was locked out of 6th (like the lockout for reverse), but hitting the clutch a 2nd time always made it work. Dealership could not reproduce problem.
Since 6500 miles to present (7500 miles) I get a grind when moving into 6th gear (crunching sound as if the synchro-mesh is not working properly). It happens every single time under every condition. It is so consistent I can do tests around it: clutch fully down as far as it can go right to the floor (grind), high speed move from 4th to 6th or 5th to 6th (grind), low speed gentle move to 6th at 2500rpm from 5th (grind), count 2 secs before moving stick out of neutral to 6th (grind) etc.
The only way to avoid the grind is to double clutch (clutch pedal in, move to neutral from lower gear, clutch out, clutch in move to 6th, clutch out). Every other gear is fine under all conditions and driving behaviour, so now I am mostly avoiding 6th altogether.
I did a search on various G35 forums and it seems some people with grinding in certain gears need a new gearbox. Am I one of those people? Stay tuned to find out (I already have the answer but a little anticipation never hurt)...