I hvae the greddy Cat back right now with the 3inch mid pipe on my car and was thinking about doing a single Exhaust on my car but having it come out at an angle like the single exhaust rx-7's

youd get some decent weight savings. Doesnt racing beat make a single side exhaust??

apparently you failed Internet Forum Searching 101 :cwm27:

I was thinkin' about the same thing, I did that on my NA FC... but I want the muffler to be in the middle of the rear bumper, kinda like what Stillen did with the 350Z. Obviously I need to have somebody customize or make me a new rear bumper. I'm still thinking about it... but if I were to pursue it, It'd be full titianium and a new polyurethane bumper that'll match my Tsunami front bumper and sideskirts. maybe after I return from Iraq...

apparently you failed Internet Forum Searching 101 :cwm27:

I didnt fail, just suggesting he search nicely...

No i did serch on the single pipe, i like the HKS one but to me it looks to plain looking no angle or anything and also the one pipe out the middle of the car is ugly as hell

Unfortunately, it would be almost impossible to position the muffler with a similar angle as the single side exhausts on an FC or FD. If you look at the attached picture of the single side HKS Hi-Power exhaust, you will notice that there is very little room.

Good Luck! :)

http://www.rx8club.com/attachment.php?attachmentid=86920

the only way to do it is to make a custom bumper with the exhaust more towards the center

I would definately like to put in a single slant exhaust... I know there are a lot of people here who do not like that style, but for some strange reason, I do.

If you do get a single done, please post pics, I'm very interested to see someone do this.

No i did serch on the single pipe, i like the HKS one but to me it looks to plain looking no angle or anything and also the one pipe out the middle of the car is ugly as hell
good luck trying cause its not gonna happen, well not with the factory bumper. Some people have tried it but it ended up looking like ass. One guy even had to remove the exhaust shroud completely for it to fit. Here's a pci of the my single sided hks exhaust. thats about as slant as you will get safely..
http://i30.photobucket.com/albums/c336/XDEEDUBBX/slant.jpg

I saw the thread on the guy you are talking about deedub. His did look odd without the shroud. Anyhow, I'm still interested in the way his sounded and how he did the piping and whatnot. Do you know anything about his setup?

I have with Ferrita Swedens help do a back exhaust 2.5" system with a single stainless silencer and 2 3.5" rear tips. I must say with all of the sound clips i heard of the last year nobody sounds like this one. It got a deep mellow tone more like a potent 4-cylinder engine. The system made a solid 7 hp on my RotoTest hub bench. On Wednesday i plan to dyno my prototype header which is coatad. In hope to have 5-7 hp more power. I plan int he near future sell these system to Usa if everything goes my way!

/Lasse

Unfortunately, it would be almost impossible to position the muffler with a similar angle as the single side exhausts on an FC or FD.

I just want to issue an official "Thank you" to Mazda for designing the rear of the car in such away that the above statement is true.

Single or angled exhaust on a RX-8? No thanks. I'll be more than happy to carry around a few extra pounds than drive around looking like an assclown.

As far as the argument that the single exhaust it less restrictive, sure I'll buy that, but does it really matter on our cars? :)

I didnt fail, just suggesting he search nicely...


I wasn't referring to you, there are many single exhaust threads quite a few of us have been there, done that

assclowns come in all shape and sizes, if you sound like one it's not necessary to look like one :cwm27:

http://pic17.picturetrail.com/VOL846/454183/13018294/196519029.jpg

team rx8 you from vegas?

Who made those screens?

me :)

I'm in Reno


here's the Stock Class version I did, just had to leave the dual tip exits open because the stock class rules technically don't allow them to be modified

http://www.rx8club.com/showpost.php?p=922293&postcount=47


and the race version I currently run in the STU Class with the screened exits dumps behind the differential

http://www.rx8club.com/showpost.php?p=1367749&postcount=131


BTW, I believe the Stock CLass version I built in the first link above is available for purchase, PM me for more info

.

How about running a single exaust out of the center of the rear bumper through the rotary accent? could even shape a tip the same shape...

here's the Stock Class version I did, just had to leave the dual tip exits open because the stock class rules technically don't allow them to be modified

http://www.rx8club.com/showpost.php...93&postcount=47

How loud is that set up?

How about running a single exaust out of the center of the rear bumper through the rotary accent? could even shape a tip the same shape...

I believe someone has aslready done that.

it was me. ill try to bost some pics later today.

How loud is that set up?


It's built for minimal racing weight; 9 - 10 lbs total. Inside the car it's loud. Outside the car it should pass a 93dB limit.

the exhaust pipe out the rotary symbol in the rear bumper was first done years ago in Japan. It's a novel idea, but doesn't pan out well in reality. You're better off just dumping it with a small turndown just before reaching the bumper, as I did with the Stock Class setup above. The center section of the lower rear bumper is integral to the whole rear bumper assy. so cutting a hole in it, having it melt around the pipe etc. requires replacing the entire thing to fix.

your not going to need to worry about the bumper melting. ive had mine for 4700 miles. the bottom of the bumper acutally touches the tip. there are no signs of melting.

also, keep in mind that i have taken my car on 6 canyon runs since then. 3 of them over 40 min long with just about every shift redlined so i would imagine it gets about as hot as it ever would.

as far as noise, mine is WAY past the 94DB limit even with the silencer in. i have a 36in glasspack resonator and 600+ CFM highflow matalic cat (supposedly can take up to 2000 degree f' but we'll see) on top of the muffler and silencer. i have 3 in piping from the headers on though so its louder then if you were to stick with 2.5.

I NEVER drive without the silencer. its just too loud. also, it seems to drone inside the car at around 3000rpm and 6000rpm with and without the resonator and cat (i put everything on in stages so i know what it sounds like).

That's cool... What size piping did you guys use? And also, did you hack up the factory system to utilize the flanges?

ghOst, I like it...That may be my next project. I would like to work in the rotary accent shape somehow. Can you show a picture from underneath?